9648649
16 / 32
EMERGENCY STOP
safety pull wire
EMERGENCY STOP safety pull wire
On the window side of each chamber on the inside of the machine, the machine
is equipped with an EMERGENCY STOP safety pull wire. The pull wire operates
identically to an EMERGENCY STOP switch.
It allows to shut down the entire machine. Restarting the machine requires un-
locking the blue emergency off switch and is possible in the installation room
only, at the machine input and output.
The machine must be restarted only once it has been established that the haz-
ardous situation triggering the emergency stop has been rectified and restarting
the machine will not cause any danger.
Function message lamp
The following functions can be recognized:
Red lamp:
In the event of a collective malfunction, the red lamp flashes, and lights
up permanently if the EMERGENCY STOP switch is pressed.
White lamp:
Program executing
Green lamp:
Program end
10.3
Commissioning the system
Make sure that all wash pipes, wash systems, final rinse arms, sieves, tank covers and
drain pipe as well as flaps have been connected to the input and output. Ensure that all the
parts are correctly installed!
1.
Press the “FILLING/HEATING“ button.
2. After displaying "OPERATING MODE" in the touch panel, the items to be washed
can be put into the machine.
3. Close all doors.
4.
Press the “PROGRAMM START“ button.
5. Automatic doors close automatically (optional)
11
Switching on the washing machine
Press the button
„
FILLING/HEATING ON
“
The machine fills and
heats up to operational
temperature
Wait for the "ready for
operation" signal
Press the
"RESET DOOR
SURVEILLANCE"
button
after having loaded the
installation with wash ware
and closed the doors.
Press the
“PROGRAM
START
“
button
.
