19 / 32
9648649
13.3
Cleaning instructions
– daily
CAUTION!!! THE MAIN SWITCH MUST BE SWITCHED OFF BEFORE STARTING THE CLEANING
PROCESS!
DO NOT USE A HIGH PRESSURE CLEANER!!!
THE ROOM IN WHICH THE MACHINE IS INSTALLED MAY ONLY BE ENTERED BY TRAINED
PERSONNEL FOR THE PURPOSE OF OPENING THE DRAIN VALVES AND CLEANING THE FINE
SCREEN IN THE WASH TANK.
Switch off the machine.
Open the installation switch
cabinet.
Open the drain valve of the
wash tank.
Open the drain valve of the
wash tray.
Remove the covering at the
wash tank.
Remove the tank sieve.
Clean the tank sieve.
Remove the upper covering
sheet.
Clean the upper covering
sheet.
Remove the condensation
separator.
Clean the condensation
separator.
Clean the guide rail of the
wash system.
Clean all nozzles with a ny-
lon brush.
Remove the lateral sieve
basket.
Clean the lateral sieve bas-
ket.
Clean the tread plates with a
hose.
Remove the tread plates
from the wash chamber.
Clean the wash chamber in-
side with a hose.
Check the intake opening
for foreign bodies.
Reinsert the tread plates.
When you have cleaned the machine, replace all the parts and check that you have replaced them all and that they are in the correct position.
After you have installed the parts, close the open drain valves.
Close the installation space.
The machine, switch cabinets and other electrical components must NOT be sprayed with
a hose or a high pressure cleaner.
