11 / 32
9648649
WE DO NOT ACCEPT
NO LIABILITY
FOR DAMAGE
OR INJURY ARISING FROM FAILURE TO
OBSERVE AND ABIDE BY THESE SAFETY
INSTRUCTIONS!!!!
5.3
Working on the electrical equipment
Any repair work and troubleshooting on the system's electrical equipment must be carried
out by a qualified electrician!
Check the electrical equipment regularly! Tighten any loose connections! Replace any
damaged leads/cables immediately!
Always keep the switch cabinet closed! Access is only allowed to authorized persons with
key/tools!
6 Assembly instructions (for a partially completed machine)
These apply where the MEIKO product is a partially completed machine in the sense of the
Machinery Directive (Directive 2006/42/EC).
Observe the following items when connecting MEIKO products to an existing installation:
- The components must be aligned with one another, connected in an appropriate man-
ner, and fastened so that safe operation is assured. (Choose conditions and fasteners
on site in line with this).
- Dangers (e.g. drawing in, crushing, shearing or cutting) that potentially arise due to the
connection must be prevented appropriately.
- The electrical connection to the supply grid on site, and any necessary electrical con-
nections must be implemented in line with the enclosed wiring diagram.
- During installation, make sure that you avoid damage, in particular to the electrical in-
stallation.
- After completing the works, check the system for damage.
- Safety and functional tests must be performed in the scope of testing the complete
system at the latest.
- The system is supplied with slide rails to optimise the transition point where applicable.
Working on the electrical equipment
DANGER
Risk of injury due to electric shock
Work or repairs to the electrical equipment of the system must be conducted by a qualified
electrician!
The wiring diagram for the partially completed machine delivered contains all necessary
operational shut-offs known to the manufacturer MEIKO, as well as other known, necessary
shut-offs and electrical connections. The connectors are clearly indicated in the wiring dia-
gram. Always make sure that these connections are implemented prior to commissioning
the machine, and that they work reliably.
If any unknown sources of danger that are not described by MEIKO arise due to connecting
system parts, you must eliminate them; this may potentially mean that you must not operate
the machine.
CAUTION!
CAUTION!
