MEDIAIMAGER – Users’ Guide, Version 1.7
Page 59 of 63
Uncalibrated device (medium)
When connecting media to the device, it may turn out that it will not be calibrated. This is most
often caused by a different software used by the media manufacturers.
If the connected media is detected as unrecognized (Uncalibrated) the following window will appear
on the screen:
At this point, select the port to which the media has been connected.
First choose the device side - expansion, left, back or right, then confirm with the OK button. Then
the application will ask you to indicate a specific port which you also confirm with the OK button.
When selecting ports and approving, please pay particular attention to the correct selection.
A mistake may mean that during the selected process the media will be misidentified.
In the event of a mistake or problems with calibration, please contact the support engineer via e-
mail [email protected]
