MEDIAIMAGER – Users’ Guide, Version 1.7
Page 23 of 63
Choose the source and target drive for the imaging processing.
The source drive will be marked in red, whilst the target drive will be presented in green. Please
make sure that the target media is correct. Starting the process will overwrite it.
Press the middle buttons to switch between different interfaces of connected target drives (SATA,
USB or LAN).
Lower section of this screen contains guidance to the process.
It is possible to plug and unplug drives anytime as long as no process is performed. Application will
rescan automatically if it detects any changes. Scanning can be also performed manually by clicking
the
button.
