MEDIAIMAGER – Users’ Guide, Version 1.7
Page 37 of 63
Restoring image
Mediaimager provides image restoring functions. This option allows to use previously saved image
files and apply them to another drive. Restored image is an exact copy of the source.
To start restoration, press the restore tile available at Home screen or select restore option from the
left panel.
Restoring image
Restore File to disk
window provides information on currently plugged devices. Source drives on the
left are marked in red. On the opposite side, target devices are marked in green. Press the middle
buttons to switch between different interfaces of connected target drives (SATA, USB or LAN).
After selecting source drive, window with suggested file names will appear. In case of no supported
data images are available, the list will not appear.
Bottom section of this window provides guidance of the process.
It is possible to plug and unplug drives anytime at this point. Application will rescan devices
automatically. Scanning can be also performed manually by clicking the
button.
When the image and target drive are selected, press
button to proceed.