PELLET STOVES
Chapter 4
USE AND MAINTENANCE MANUAL
page
48
Operation
Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
STAGE 7
STAGE 8
5
PROGRAM
24 h
6
PROG RAM
24 h
The user does not wish to enter any program for
WE
= Wednesday and, therefore, only needs to press
button
no. 5
to select program
00
and then confirm
the selection with button
no. 4
.
As no program has been selected for
WE
=
Wednesday (in fact we have selected
00
), note that
the programming has moved onto
TH
= Thursday. No
dash has appeared underneath the
WE
= Wednesday
symbol. This means that no daily timer program has
been set for that day.
STAGE 9 CONCLUDING
Continue as illustrated for Monday, Tuesday and
Wednesday to complete the programming for the
remaining days - Friday, Saturday and Sunday. The
only difference is the program number that you
continue to select using button
no. 5.
Once all the days have been programmed (in other
words, you have reached
SU
= Sunday), press button
no. 6
again to exit programming. Alternatively, you
can simply wait
30 seconds
and the remote control
will automatically exit programming, confirming all of
the settings entered. To view the programming
quickly, check whether dashes are present
underneath the symbols of the week. You can access
programming again at any time by pressing button
no.6,
reselecting program
P99
with button
no. 4
to
check that the program has been set.
4.14.
ENABLING THE KEYPAD LOCK
The remote control is fitted with a function that makes it possible to
enable a keypad safety lock. This prevents the buttons from being
pressed accidentally or if a child should pick up the remote control.
The lock is enabled by simply pressing button
no. 6
for
3
seconds.
After this time the "lock" symbol will appear at the top, left-hand side of
the display to confirm that the keypad is locked.
To disable the lock repeat the operation described above.
MAX
