PELLET STOVES
Chapter 4
USE AND MAINTENANCE MANUAL
page
41
Operation
Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
Once program
P99
has been selected, press button
no. 4
to enter the
daily programming mode. The first day of the week will begin to flash
(
MO
= Monday).
Use button
no. 5
to scroll through the programs from
01
to
62
and
select the one that you require. Refer to the table in
paragraph
4.12When carrying out this type of programming, note that the
24h
icon will also light up, indicating that you are carrying out daily rather
than weekly programming.
Once you have selected the program required for the relevant day
(E.g.:
no. 32
for
MO
= Monday), press button
no. 4
again to program
the day
TU
= Tuesday) Note that as soon as you confirm the program
for
MO
= Monday a dash will appear underneath the word
MO.
This
dash signals that a daily program is active for that day.
As soon as you confirm the daily program using button 4 the remote
control moves onto the next day. Repeat the settings operations
described above for all the days of the week.
If for one of the days of the week you do not wish to set any
program, select program 00 and continue with the
programming. Note that no dash appears underneath that day.
When you have finished programming
press button no. 6 or wait 30
seconds
and the remote control will automatically exit the menu,
confirming the choices made.
If a timer program is enabled but the user decides to
start-up/ shut down the stove, the command that
the user has given is considered more important than
the timer and is therefore carried out. The next timer
command is ignored.
Example:
if the timer is set to start up the stove at
10:00 but the user is cold at 9:00 and
decides to light it they can start it up by
pressing button no. 5. At 10:00 the timer
will be ignored as the stove is already on.
The setting defined on the personalised program is
stored in the memory even if you remove and
replace the batteries in the remote control.
IMPORTANT NOTE
The stove takes 10 - 15 minutes to start up and a further
10 - 15 minutes are required until sufficient hot air is
released.
Please take this time into consideration when adjusting the
start-up time. Similarly, the stove takes approximately 30
minutes to shut down, during which time the heat
accumulated by the appliance is still released into the room.
Take this time into consideration for considerable fuel
savings.
PROGRAM
24 h
PROGRAM
24 h
