PELLET STOVES
Chapter 3
USE AND MAINTENANCE MANUAL
page
19
Installation and assembly
Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
J
Piedino J
The body of the stove or unit must always be handled vertically and
only using trolleys. Pay particular attention to the door and its glazing
to protect them from mechanical knocks which would compromise their
proper working order.
In all cases, appliances must be handled with care. If possible, unwrap
the stove near the chosen place of installation.
The materials making up the packaging are neither toxic nor harmful
and, as such, require no special disposal measures.
Storage, disposal and any recycling is therefore the responsibility of the
end user and must be carried out in compliance with the applicable
laws in force.
Do not store the unit and claddings without the associated packaging.
Position the stove without the cladding and then proceed with the
connection of the flue pipe. Once the connections have been made, fit
the cladding (ceramic or steel-sided).
If you have to connect the stove to an outlet pipe that crosses the rear
wall (to flow into the flue pipe) take great care not to force the mouth.
Adjust the 4 feet
(J)
to find the correct level so that the smoke outlet
and pipe are coaxial. The feet must be adjusted without the steel or
ceramic sides as the adjustment occurs inside the cladding.
If the smoke outlet of the stove is forced or used
inappropriately to lift or position it the function of
the outlet will be irreparably compromised.
1.
Rotating the feet clockwise
lowers the stove
2.
Rotating the feet
anticlockwise raises the
stove
Foot J
