b
g
54
12-RECOMMENDATIONS FOR SAFE USE
For the brazier to be cleaned properly, remove it from its housing completely and thoroughly clean all the holes and the grate on the
bottom. If good quality pellets are used, you will normally only need to use a brush to restore the optimal operating conditions of the
component.
Cleaning the ash collection compartment
To clean the ash collection compartment, you must raise grille “
g
” by rotating until it rests against the hearth. Clean out any residual
ash before lowering the grille “
g
”. The quality of the pellets used and user experience will determine the required cleaning frequency.
However, it is recommended not to exceed 2 or 3 days.
CLEANING THE GLASS
It is recommended to clean the ceramic glass with a dry brush, or if it is very dirty, spray a little specific detergent and clean with a cloth.
ATTENTION!
Do not use abrasive products and do not spray the glass cleaning product on the painted parts and on the door
gaskets (ceramic fibre cord).
