6
5
4
1
2
3
47
9-OPERATION
Technical Dept. - All rights reserved - Reproduction is prohibited
Remote control (accessory - NOT SUPPLIED)
LEGEND OF BUTTONS
1. Increase temperature setpoint
4. Temperature/power switch and vice versa.
Decrease temperature setpoint
5/6. Set power and ventilation
3. ON/OFF
PLEASE NOTE Adjusting the temperature with the remote control has no effect if the external thermostat has been selected.
Since the remote control is an accessory, it is deactivated by default, so it must be activated with the control panel.
Proceed as follows to activate it:
• press any button on the control panel to enter the MENU
• press MENU
• scroll down to SETTINGS
• press SET
• scroll down to TELECOMANDO (REMOTE CONTROL)
• press SET
• select ON with the arrow keys
• press OK
Attention! Before using, remove the protection from the battery.
Keys 1 and 2: set the room temperature (automatic mode). See paragraph “Automatic mode”.
Keys 6 and 5: set power and ventilation (manual mode). The values that can be set are from 1 to 5.
Power does not scale immediately but reaches it at the set time (1 power per minute)
Button 3: On/Off
Button 4: moves on from temperature to flame power; when passing from one status to another, the following values will be set:
- Temperature 23°C.
- Power 3 ventilation 3
