38
9-OPERATION
MENU STRUCTURE
The menu allows you to set and change a number of parameters:
GENERAL MENU
• DATE/TIME
• CHRONO
• SLEEP (only when stove is on)
• SETTINGS
•
Language
•
Auto Eco (ON-OFF)
•
Tones (ON-OFF)
•
Pellet recipe set: +3 (10%)+2 (6%) +1 (3%); 0; -1 (-6%); -2 (-13%) -3 (-20%)
•
Var. % rpm fumes (set: +50, +40, +30, +20, +10; 0; -10, -20, -30)
•
Thermostat (ON-OFF)
•
Remote control (ON-OFF)
•
Auger loading (ON-OFF - shown only when stove is off).
•
Technical menu (accessible by a specialised MCZ technician - password required)
•
Type of stove
•
Hours of service
•
T off-Eco
•
Parameters
•
Component test
•
Counter Memories
• INFO
•
Type of stove
•
Software
•
Total hours
•
n. of start-ups
•
RPM evacuator
•
T. smoke
•
Heat exchanger voltage
•
auger loading
•
Flame
Setting the time and day
Press the relative MENU key and SET will appear. Enter SET and the programme will appear to change:
• day
• hour
• minutes
• day number
• month year
For example, if you need to change the time, when GIORNO (DAY) appears on the screen, press SET, and the hour will start flashing in the
middle of the screen. Then, using the keys on the bottom left or right, change the day, followed by the hour, minutes, day number, etc.
in the same way, according to the current time and date. Each change must be confirmed by pressing the OK key, otherwise it will not be
saved. The ESC key takes you back to the previous screen.
If the control panel is inactive for 60 seconds, it goes back to the home page without saving the changes.
