S
S
v
v
W
Q
Q
Q
W
19
4-INSTALLATION AND ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
PREPARATION AND UNPACKING
Remove all the parts of the packaging (polystyrene, wood, plastic). All packaging materials can be reused for similar use or disposed of as
urban solid waste, in accordance with current regulations.
After having removed the packaging make sure the product is intact.
Handle the product with suitable means paying attention to the applicable safety regulations in force. Do not turn the
packaging over and handle the majolica parts with care.
The stove is delivered in a single package. Open the package, remove the two screws “
v
” which secure the stove brackets to the pallet and
then remove the bracket “
S
” from the stove foot. There are four bracket: two “
Q
” at the front and two “
W
” at the rear.
Install the stove in the chosen area, making sure it complies with the requirements.
The stove body or unit must always be kept in a vertical position when handled, and handled using carts only. Pay particular attention to
the door and its glass, protecting them from mechanical knocks that would compromise their integrity.
The product must always be handled with care. If possible, unwrap the stove near the chosen area of installation. The packaging materials
are neither toxic nor harmful, therefore no particular disposal measures are required.
REMOVE THE FIREBOX CAST IRON PANEL CARDBOARD
