McAfee Data Loss Prevention 9.2.1, Руководство по установке

Страница: 38 / 78

Configure McAfee DLP Prevent
McAfee DLP Prevent can be set up to process email or webmail by adding the appliance to McAfee DLP
Manager, then configuring it to connect to one or more email or web servers.
Task
1
Open the
Devices
page in one of two ways:
• In ePolicy Orchestrator, select
Menu
|
Data Loss Prevention
|
DLP Sys Config
|
System Administration
|
Devices
.
2
Add a McAfee DLP Prevent appliance to McAfee DLP Manager.
a
Select
Actions
|
Add New Device
.
b
Enter the
Device IP or hostname
and
Password
in the value fields.
c
Click
Add
.
The
System Administration
page reappears.
3
From the McAfee DLP Prevent appliance, click
Configure
.
The
System Configuration
page appears.
4
Scroll down to the
Smart Host
field.
Configuring more than one Smart Host is not supported.
• If you are setting up McAfee DLP Prevent to process webmail, leave the
Smart Hosts
field blank.
Smart Hosts are used only with SMTP traffic, and no configuration is needed for a proxy server
because it is already part of the network.
• If you are setting up McAfee DLP Prevent to process email, type the
Smart Host
IP address to
which the processed email will be routed. (Host names are not supported.)
In some cases, the Smart Host, sometimes known as the downstream MTA, might be on the
same machine as the email server. If so, you must add a white list to prevent email looping.
5
In the
Email Address
field, type in one or more IP addresses separated by commas (no spaces).
These addresses are the only email servers allowed to send messages to McAfee DLP Prevent for
processing.
6
In the
Email Notification
field, add an administrator's email address to which notification will be sent to
verify the connection.
7
Click
Send test mail
to test the smart host connection.
8
Click
Update
.
SSL ‑ encrypted webmail transmissions might become visible during this process.
9
Check the email account to which notification was sent. If no verification message was received,
repeat the process.
4
Configuring McAfee DLP appliances and adding servers
Configuring McAfee DLP Prevent
38 McAfee Data Loss Prevention 9.2.1 Installation Guide