McAfee Data Loss Prevention 9.2.1, Руководство по установке

Страница: 15 / 78

2
Installing or upgrading the software on
4400 appliances
A McAfee DLP installation on the 4400 contains two released images, each of which contains an
operating system (except for the kernal) and DLP software.
Primary and secondary images are initially duplicate installations. When the system is upgraded, the
primary and secondary disks can contain different versions of the same product.
The system automatically boots from the latest installed version.
Contents
Download the 4400 archive
Boot options
Install a fresh image on 4400 appliances
Upgrade the products on 4400 appliances
Apply a hotfix
Convert an installation to another McAfee DLP product
Restoring the drives
Download the 4400 archive
To prepare for installation on the 4400, download the software from the Service Portal.
Before you begin
Locate the grant number you received after purchasing the product.
McAfee DLP Manager is pre
‑
installed on the model 4400 appliance. Install the other McAfee DLP
products as needed.
Downloadable archives all have legacy names preceded by i, although the product names have
changed. In particular, note that McAfee DLP Monitor is also known as iguard.
Task
1
Open the McAfee support page by typing
support.mcafee.com
into the address bar of a web
browser.
2
From the
Products & Solutions
menu, select
Product Downloads
, or locate and click the link under the
Corporate Support
heading.
3
In the
Download My Products
field, enter your grant number.
4
Scroll down the page, then select the
McAfee Network DLP
product.
2
McAfee Data Loss Prevention 9.2.1 Installation Guide 15