McAfee Data Loss Prevention 9.2.1, Руководство по установке

Страница: 19 / 78

2
Copy the archive to the appliance.
• If you downloaded the archive to a Windows
‑
based computer, use WinSCP.
• If you are copying the archive from a Linux server, use the SCP command
scp
‑
rp <package
number> root@<name or ip address>:<directory>
3
Make an installation directory.
# mkdir /data/install
4
Find out which version is currently installed.
# cat /data/stingray/etc/version
5
Run the
system_info
utility to determine whether the system is running the product from the
primary or secondary image, so that you can decide where to install the update.
# /data/stingray/ksh/system_info
Install the update on the disk that is not used. For example, if
system_info
returns the message
"The system is currently running
<product>
from the primary image," install the update on the
secondary disk with
install_to_sec
.
6
From the directory you downloaded the archive to, extract the contents of the archive, using the ‑ C
option to expand it into the /data/install directory.
# tar xvzf ndlp_<product>.tgz
‑
C /data/install
7
Go to the /data/install directory.
# cd /data/install
8
Run the installation script.
Before you type the command, run
pwd
to establish that you are in the correct product directory. You
must be sure that you are running the updated scripts in the upgrade archive that you just
downloaded and extracted.
iGuard was the original name of McAfee DLP Monitor, but the archives have not been renamed, and
each product name is preceded by "i" to maintain the original naming convention.
# ./install_to_pri <product> .
or
# ./install_to_sec <product> .
The product image installs on the primary or secondary disk. When the upgrade is complete, a
message appears stating which image will boot next.
9
Restart the system.
# reboot
Restarting the system might take 10–15 minutes.
10
Log on to the McAfee DLP device as
root
, go to the installation directory, and verify the installation
with the command:
# cat /data/stingray/etc/version
If the Release field contains 9.2.1, installation is complete.
11
Install Hotfix 793756_46026 on all devices.
Installing or upgrading the software on 4400 appliances
Upgrade the products on 4400 appliances
2
McAfee Data Loss Prevention 9.2.1 Installation Guide 19