Integrate the appliance using a network tap
Task
1
Disconnect the cable between your WAN router and your LAN switch.
2
Connect Monitor Port A of the network tap to Capture Port 0 on McAfee DLP Monitor.
3
Connect Monitor Port B of the network tap to Capture Port 1 on McAfee DLP Monitor.
4
Connect Network Port A of the network tap to a router inside the firewall.
5
Connect Network Port B of the network tap to the LAN switch.
Complete the setup
Add the NTP server to sync McAfee DLP Manager to the network.
Task
1
Open a web browser and enter the assigned IP address in the address bar to restart McAfee DLP
Manager.
2
Click the
System
tab and select the
Configure
link.
3
Scroll down to the
Time
section and enter the NTP server.
pool.ntp.org
4
Click
Time at Server
to verify the current time.
5
Click
Update.
Configuration is complete. If you want to integrate the DLP system into McAfee
®
ePolicy Orchestrator
®
4.5 or 4.6, you can do it now.
1
Setting up the hardware
Complete the setup
14
McAfee Data Loss Prevention 9.2.1
Installation Guide
Содержание Data Loss Prevention 9.2.1
Страница 78: ...TP000030C00...
