Maxi-Cosi Pria 70, Инструкция по эксплуатации

Страница: 29 / 36

55
E. Installing Rear-Facing
56
Check Vehicle belt
Tightness
Grasp the child restraint at the
belt path with one hand. Push
and pull the child restraint
from side
to side, forward and back.
The child restraint should not
move more than 1 inch.
NOTE: If it moves more than 1 inch, try reinstalling the child
restraint or try another seating location.
Secure your child in the child restraint.
8.
With the TinyFit infant insert
(B) , make sure harness
system is loose and headrest
is up. Thread vehicle belt
UNDER seat pad and TinyFit
infant insert on top of buckle
strap and out the opposite
side.
Do not place vehicle belt
over child’s legs.
B
Tighten Vehicle Belt
Push down firmly on the
child restraint and pull on
the vehicle shoulder belt to
tighten.
It may be easier to tighten the
vehicle belt through the belt
path opening as shown.
With a switchable retractor,
pull the vehicle shoulder belt
all the way out to switch the
retractor into the ALR mode
before tightening. Feed the
slack back into the retractor
while tightening.
7.
Secure your child in
the child restraint
and check for proper
recline.