E. Installing Rear-Facing
49
50
Tip:
You may need to
pull the pad off the front
corners of plastic shell to
help thread the LATCH belt
across the shell.
Make sure the LATCH
Belt is Not Twisted
Replace the pad on the
corners of shell if needed.
If you are using the TinyFit
infant insert, be sure push
the insert back into the
seat back and the headrest
is pushed down on top of
insert and locked into place.
3.
Store Top Anchorage
Hook (Tether)
Attach the top anchorage
hook (tether) to the bottom
of base as shown. Tighten
tether to remove the slack.
E-3
Install Rear-Facing with
LATCH
1.
Place Child Restraint
in the Back Seat Rear-
Facing
Move the front seats forward
to give you room to install the
child restraint. With the child
restraint in a reclined position,
center the child restraint in
the chosen seating position.
2.
Do not use the LATCH system along with the
vehicle lap or lap/shoulder belt.
Check LATCH belt before each use. Use only
if the belt can be tightened properly and
securely.
Attach the top anchorage hook (tether) to
recline stand when used rear-facing.
Failure to follow these warnings can result in
serious injury or death.
Содержание Pria 70
Страница 1: ......
