Maxi-Cosi Pria 70, Инструкция по эксплуатации

Страница: 25 / 36

Pull Connector Across to
Opposite Site
Without the TinyFit infant
insert (A)
, thread vehicle belt
UNDER seat pad infront of
buckle strap and out opposite
side. Buckle vehicle belt.
With the TinyFit infant
insert (B)
, make sure
harness system is loose
and headrest is up. Thread
vehicle belt
UNDER seat pad
and TinyFit infant insert on
top of buckle strap and out
the opposite side.
Do not place vehicle belt
over child’s legs.
E. Installing Rear-Facing
LATCH Belt
Lap Belt
Lap/Shoulder Belt
Rear-Facing With TinyFit Infant Insert:
4-22 lbs (1.8-10 kg) and Top of Child’s Head is
Below the Top of TinyFit Infant Insert. Rear-Facing
using 5-point harness.
Rear-Facing Without TinyFit Infant Insert:
18-40 lbs (8-18 kg) and 40 inches (101.6 cm) or
less in height and Top of Head is Below Top of the
Headrest. Rear-Facing using 5-point harness.
E-1 Preparing to Install Rear-Facing
47
48
Never place a child rear-facing in a
seating position with an active frontal
airbag. This can result in serious injury
or death.
This child restraint must always face the rear
of the vehicle and reclined when the child is
less than one year old.
E-2 Preparing to Install LATCH
Rear-Facing
Routing LATCH Belt
Insert the connector
without adjuster through
the rear-facing belt path.
1.
Adjuster
A
B
continued on next page.
2.