C. Basic Use
Locate buckle’s metal
retainer under the shell.
Rotate metal retainer, then
insert retainer up through
the shell and pad.
From the top, pull buckle
free from shell and pad.
Reposition buckle location.
Insert the buckle’s metal
retainer through the desired
slot. Make sure buckle is
facing forward.
b.
c.
d.
To Change Buckle
Position
Fully recline the child
restraint. Reach under the
seat between base and shell.
a.
23
24
continued on next page.
To Adjust Harness/
Headrest Height
Loosen harness straps.
Squeeze the headrest
adjustment lever and
move headrest up or
down to the proper height
and lock into place
7.
Check Buckle
Position
Determine which of the
available buckle positions
will be comfortable and
provide a snug fit for
your child.
5.
You
MUST
use the 1st or 2nd buckle strap slots
when rear-facing. When using the TinyFit infant
insert, you
MUST
use the 3rd slot. Any slot can be
used for forward-facing.
1
2
3
Do not use this child restraint rear-
facing if the top of your child’s
head is above the top of the child
restraint’s headrest.
Do not use this child restraint
forward-facing if the midpoint of
your child’s head is above the top of
the child restraint’s headrest.
Make sure the harness height is correct for
your child’s size.
Failure to follow these steps can result in
serious injury or death.
Содержание Pria 70
Страница 1: ......
