background image

 C-1 

Choose Position for Your Child

Your child’s height, weight and age determine how 
your child restraint should be placed in the vehicle. 

18-40 lbs (8-18 kg) and 40 
in. (101.6 cm) or less

Rear-Facing using 
5-point harness Without 
TinyFit Infant Insert

Child and child restraint are 
placed in the back seat, facing 
the back of the vehicle. 

40-70 lbs (18.1-32 kg) 
and 43-52 in. 
(110.1-132.1 cm) and 
Over 1 Year Old

Forward-Facing using 
5-point harness

Child and child restraint are 
placed in the back seat, 
facing the front of the vehicle. 

continued on next page.

13

14

22-40 lbs (10.1-18 kg) 
and 34-43 in. 
(85.1-110 cm) and 
Over 1 Year Old

Forward-Facing using 
5-point harness

Child and child restraint are 
placed in the back seat, 
facing the front of the vehicle. 

C. Basic Use

Harness Covers
(on select models) 

Harness covers help provide 
comfort to the neck.  For 
smaller infants, you may need 
to fit the upper end of the 

harness covers into the harness slots.

To remove, unthread the harness straps from splitter plate and 
remove the harness covers.  Rethread harness straps back 
through the correct harness slots and attach the harness to the 
splitter plate. See section C-3. 

 C-2 

Accessories

PUSH

Body Pillow
(on select models) 

The body pillow adds extra 
comfort to your child.  As 
your child grows, remove 
the pillow from behind the 
harness straps. 

PUSH

4-22 lbs (1.8-10 kg) and 
Top of Child’s Head Below 
Top of TinyFit Infant Insert

Rear-Facing using 
5-point harness and the 
TinyFit Infant Insert

Child and child restraint are 
placed in the back seat, facing 
the back of the vehicle. 

Содержание Pria 70





































Отзывы: