Forward-Facing Position
Harness slot must be
even
with or just above
the
shoulders.
If the highest harness slot
adjustment is below the child’s
shoulders,
do not
use this
child restraint.
Check Harness Height
With child in the seat, check
the location of the harness
guide.
Follow the guidelines below
to determine the correct
harness/headrest height.
1.
Rear-Facing Position
Harness slot must be
even
with or just below
the
shoulders.
If the lowest harness slot
adjustment is above the
child’s shoulders, switch to
the TinyFit infant insert, as
long as the child is under
22 lbs. AND the top of the
child’s head is blow the top
of the TinyFit Infant Insert.
C. Basic Use
21
22
continued on next page.
Push Harness Straps into
Lower Harness Slots in
TinyFit Infant Insert
Insert the harness strap,
buckle tongue and chest clip
into the lower harness slot
and pull out from the back
of the TinyFit infant insert.
Remove TinyFit infant insert.
5.
Thread Harness Straps
into Upper Headrest
Harness Slots
Thread one harness strap into
each headrest harness slots.
6.
Attach Harness Straps to
Splitter Plate
Fit loops on harness ends
completely on
the splitter
plate. Make sure harness
straps are not twisted
7.
Preparing Without the TinyFit Infant Insert
Harness system must be reattached correctly.
Failure to follow these steps can result in
serious injury or death.
Содержание Pria 70
Страница 1: ......
