Maxi-Cosi Pria 70, Инструкция по эксплуатации

Страница: 33 / 36

63
64
F. Installing Forward-Facing
To Remove LATCH Belt
From Vehicle Anchor
Remove child from child
restraint. Press down
firmly on child restraint and
press the red release button
on each connector.
6.
F-5 Install Forward-Facing
With Vehicle Belts
Secure LATCH Belts
You MUST fasten the
LATCH belt connectors to
the side of plastic shell
as shown when using the
vehicle seat belts.
1.
Do not use the LATCH system along with the
vehicle belt. Secure LATCH belts when using
the vehicle belts.
Check the vehicle belt before each use. Use
only if the belt is tightened properly and
securely.
Failure to follow these warnings can result in
serious injury or death.
Note: Review the section D-4 to determine what kind of
vehicle belts you have. Review your vehicle’s owner manual for
vehicle seat belt use.
continued on next page.
Check LATCH Belt
Tightness
Grasp the child restraint
at the belt path
with one
hand. Push and pull the child
restraint from side to side,
forward and back. The child
restraint should not move
more than 1 inch.
NOTE: If it moves more than
1 inch, try reinstalling the
child restraint or try another
seating location.
Secure your child in the child restraint.
5.
Place Child Restraint in
the Back Seat
Forward-Facing
Place the child restraint
flat on vehicle seat bench
and slide the child restraint
back until it pushes
against the vehicle seat
back.
22-40 lbs (10.1-18 kg)
40-70 lbs (18.1-32 kg)
2.