![background image](http://html1.mh-extra.com/html/mauell/me30-infobox-connect/me30-infobox-connect_manual_1742264006.webp)
ME30 infobox connect
6
infobox connect
Dimension drawing and mounting dimensions
T
RUN
FA
92
95
Panel thickness
1 mm to 45 mm
Mounting brackets
at the bottom left and
top right of the device
96
96 for 8 messages
144 for 16 messages
192 for 24 messages
288 for 40 messages
95
9
Terminals
Installation and Commissioning
• The membrane keyboard on the faceplate contains replacable message labels. To extract a
label, remove the detachable bezel of the device:
- Withdraw the bezel by pulling at the corners of the device housing
- Slide the labels to be replaced upward and remove them from their pockets
- Write the message text on the label, replace the label in its pocket and put the bezel back onto
the housing.
• Installing the device in the panel cutout.
Use the 2 enclosed clevis type connectors to mount the device. Tighten the connectors until the
device is securely fixed.
• Wiring according to the connection diagram.
(The maximum permissible connection distance for external pushbutton signals and RS232 is
3 metres)
Careful: The device should only be connected by qualified personnel and under strict
compliance with the relevant safety regulations.
Electrical Connections
Type of connection:
Fixed screw-type terminals: • Terminal blocks, 3 to 9 pins / 5.08 grid for message I/O
• Plug connector, 2 to 6 pins / 5.08 grid for power supply/pushbutton inputs
Plug-in screw-type terminals: • Plug connector, 2 to 9 pins / 5.08 grid
Connectable cross-sectional areas:
Single-conductor cable
Type of
rigid (mm
2
)
flexible (mm
2
)
AWG
flexible with end splice (mm
2
)
connection
without plastic splice
with plastic splice
Terminal block
0.14 to 1.5
0.14 to 1.5
26 to 16
0.25 to 1.5
0.25 to 1.5
Plug connector
0.2 to 2.5
0.2 to 2.5
24 to 12
0.25 to 2.5
0.25 to 2.5
Twin core cable
Type of-
rigid (mm
2
)
flexible (mm
2
)
flexible (mm
2
)
connection
with end splice
with TWIN end splice
without plastic splice
with plastic splice
Terminal block 0.14 bis 0.75
0.14 to 0.75
0.25 to 0.5
0.5
Plug connector 0.2 bis 1.0
0.2 to 1.5
0.25 to 1.0
0.5 to 1.5