Matrix SDT 5000, Руководство пользователя

Страница: 28 / 67

SDT 5000 User Manual Document MBUD-0109v11
3.2.4 EVENT COMMANDS
The commands used for the events include: evtcfg , evtstatus , and evtuser .
evtcfg is used to configure the various events. The syntax is:
evtcfg [parameter [value] | [<
event name> [parameter [value] ] ]
evtstatus is used to report on the status of the events. The syntax is:
evtstatus
[<general parameter>] | [<event name> [parameter]]
evtuser is used to generate a user event. The syntax is:
>evtuser
See the SDT 5000 command reference for details on these commands.
3.2.5 MESSAGE FORMATS
The first byte is the message identifier. All multibyte values are big-endian format with the
exception of the CRC values that are little endian.
3.2.5.1 Event Acknowledgement
bit 7 6 5 4 3 2 1 0 Byte
0 1 0 0 0 0 0 x 1
x : The sequence number in the message being acknowledged.
3.2.5.2 Event Message
bit 7 6 5 4 3 2 1 0 Byte
0 1 0 0 0 1 0 x 1
0 1
Event s
2
3
4
5
Time
6
7
CRC
8
x : Corresponds to the sequence number of the message. The acknowledgement,
if enabled, must use this same bit as a response. The receiver should not rely
on the sequence number to alternate.
Event : The event number.
0 – Schedule wakeup (A),
1 – Alarm 1 (B) (C),
2 – Alarm 2 (D) (E),
Version 1.1, 03/24/06 Page 20