background image

2017 OWNERS MANUAL / 

114

This screen shows the Speedometer, Air Temperature, Water Tem-
perature, Battery Voltage, Water Depth and Engine Hours Gauges.    
 

NOTE: This screen is display only. There are no soft keys with it.

Cruise/Profile

 

 

The Profiles screen can be accessed by pressing the first Quick 
Access Key on the right side of the HV450.

 

This feature displays rider/user profiles for cruise controls based on 
user preferences for speed, ballast and smart plate settings.

Cruise/Profile Screen
Soft Key Commands

 

Use this key to access a list of preloaded pro-
files. Use the 

 or 

 to scroll through 

the list. Press 

 to select the outlined 

profile. 
Use this key to turn the cruise ON or OFF.  
This message will display when turning 
Cruise ON:  Speed Control has been enabled.   
This message will display when turning 
Cruise OFF:  Speed Control has been dis-
abled.
Use this key to increase set speed.

Use this key to decrease set speed.

Press and hold the Menu key to turn Auto 
Launch on or off.

Audio

Stereo display and functionality controls reside on the MasterCraft 
boat.  Here are a few screens available for viewing on the Stereo:

Fusion FM Channel  

            Fusion iPod Display

Fusion VHF Channel

Ballast and Trim

The Ballast and Trim screen can be accessed by pressing the 
second Quick Access Key on the left side of the HV450.

This screen shows the ballast tank fill and empty activity in addition 
to the trim tab levels. The only soft key on this screen is the Auto 
Launch/Exit key. Press this key to turn Auto Launch/Exit ON or OFF.

Gauges

 

 

Access the gauges screen by pressing the third Quick Access Key 
on the left side of the HV450.

Содержание NXT20 2017















































































































































































































































Отзывы: