manualshive.com logo in svg

MasterCraft NXT20 2017, Руководство пользователя

Владельцы MasterCraft NXT20 2017 могут бесплатно загрузить руководство пользователя на нашем сайте. Этот мануал поможет вам получить максимум от вашего судна, обеспечивая информацией о его использовании и техобслуживании. Не забудьте скачать его с manualshive.com.

Поделиться
Скачать
background image

2017 OWNERS MANUAL / 

452

offers a transferable warranty to the second owner of any remaining 
unexpired warranty coverage under the Limited Warranty. In accor-
dance with the Limited Warranty, with respect to the Lifetime Limit-
ed Warranty (which is granted only to the original retail purchaser) 
on the Structural Components (deck, hull, liner and stringer system) 
set forth in Section 2.1 of the Limited Warranty, if: 

(a) the sale of the boat by the original retail purchaser occurs within 
five (5) years of the date of the original retail purchase of the boat; 
AND 

(b) the original retail purchaser and the second owner comply with 
the provisions of Section 6 of the Limited Warranty; then the war-
ranty on the Structural Components of the boat shall be transferred 
to the second owner and shall continue in effect for a period of ten 
(10) years from the date of the original retail purchase of the boat 
by the original retail purchaser. In order to effectuate the transfer of 
any remaining warranty under the Limited Warranty by the original 
retail purchaser to the second owner, the original owner and/or the 
second owner must deliver each of the following to MasterCraft 
within fourteen (14) days of the date of the sale by the original retail 
purchaser to the second owner (and within five (5) years of the date 
of the original retail purchase of the boat with respect to the trans-
fer of the warranty on the Structural Components): 

•  Completed Original Retail Purchaser Warranty Transfer Form 

(see following pages)

•  Copy of Sales Agreement/Invoice
•  Payment of $500

WARRANTY REGISTRATION AND 

TRANSFER 

Warranty Registration

At the time of delivery to the first retail owner of a MasterCraft boat, 
the boat must be registered for product warranty purposes under 
applicable federal law, and the following steps must be performed in 
order to complete the warranty registration process for all Master-
Craft boats: 

•  At the time, and on the date, of delivery to the retail purchaser 

(boat owner), the dealer must complete the warranty registration 

for the boat owner using MasterCraft’s online warranty registra-

tion system found at DealerLink. 

•  Dealer must notify MasterCraft of a boat purchase via DealerLink 

and submit for the boat owner all required information in connec-

tion with the warranty registration.

•  Warranty registration is essential because it provides a meth-

od for distributing information to MasterCraft boat owners and 

allows MasterCraft to notify the owner of any mandatory recalls 

or other issues requiring attention.

Warranty Transfer

In accordance with the provisions of the MasterCraft Limited War-
ranty Statement (the “Limited Warranty”), if the MasterCraft boat 
is subsequently sold by the original retail purchaser, MasterCraft 

department, or to MasterCraft’s factory at the below address, within 
the applicable warranty period. For questions regarding warranty 
service or to obtain information regarding warranty service or to 
obtain information regarding the nearest authorized MasterCraft 
Dealer, please contact MasterCraft at the following address or 
telephone number: 

MasterCraft Boat Company, LLC  
Attention: Warranty/Customer Service 
100 Cherokee Cove Drive  
Vonore, Tennessee 37885  
1-423-884-2221 

Subject to the terms of this Limited Warranty, any covered boat or 
component part with a material defect in materials or workmanship 
that is returned to an authorized MasterCraft Dealer’s service de-
partment or MasterCraft’s factory during the appropriate warranty 
period will be repaired or replaced, in MasterCraft’s sole discretion, 
without charge to the owner for parts and labor. This provision is 
subject to the following terms and conditions: 

•  MasterCraft shall be obligated only to repair or replace those 

items that prove defective, in MasterCraft’s sole discretion, upon 

examination by a MasterCraft authorized Dealer’s service depart-

ment or MasterCraft’s own personnel, as applicable; 

•  MasterCraft warrants its repairs or replacements only for the 

remainder of the applicable warranty period; 

•  MasterCraft shall, in its sole discretion, fulfill its obligation to 

repair or replace any defective item at its factory or its authorized 

Dealer’s service department; and 

•  The owner shall be responsible for all costs associated with the 

transportation of the boat, towing bills, trailer or component 

part(s) to the authorized MasterCraft service department and for 

any return transportation. 

8. 

No Modification of Warranty.

 No oral or written information, 

advice or communication of any nature to or from MasterCraft or its 
representatives, employees, authorized dealers, agents, distribu-
tors or suppliers shall create a warranty or in any manner increase 
or modify the scope of this Limited Warranty in any manner what-
soever. 

Effective: July 1, 2015 

Содержание NXT20 2017















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NXT20 2017

PURSUIT OS 285 Owner'S Manual preview
OS 285
Бренд: PURSUIT Страницы: 136
YAMARIN Cross 57 Bow Rider Owner'S Manual preview
Cross 57 Bow Rider
Бренд: YAMARIN Страницы: 51
Williams Turbojet 285 Owner'S Handbook Manual preview
Turbojet 285
Бренд: Williams Страницы: 51
PURSUIT Denali 28 Owner'S Manual preview
Denali 28
Бренд: PURSUIT Страницы: 148
Coastal M-CBX9.6 2016 Owner'S Manual preview
M-CBX9.6 2016
Бренд: Coastal Страницы: 16
Bavaria 33 2008 Information & Operation Manual preview
33 2008
Бренд: Bavaria Страницы: 26
Pelican Fishing Boat Owner'S Manual preview
Fishing Boat
Бренд: Pelican Страницы: 12
Marine Power Quicksilver User Manual preview
Quicksilver
Бренд: Marine Power Страницы: 79
Hansa Sailing SKUD 18 Owner'S Manual preview
SKUD 18
Бренд: Hansa Sailing Страницы: 37
Polaris INT'L VIRAGE 2000 Parts Manual preview
INT'L VIRAGE 2000
Бренд: Polaris Страницы: 42
Lagoon WX-700 Owner'S Manual preview
WX-700
Бренд: Lagoon Страницы: 31
Banzai PIRATE SHIP 59073 Manual preview
PIRATE SHIP 59073
Бренд: Banzai Страницы: 8
Yamaha FX High Output WaveRunner 2006 Owner'S/Operator'S Manual preview
FX High Output WaveRunner 2006
Бренд: Yamaha Страницы: 151
Yamaha WaveRunner VXS 2012 Owner'S/Operator'S Manual preview
WaveRunner VXS 2012
Бренд: Yamaha Страницы: 98
Boston Whaler 150 Super Sport 2018 Manual preview
150 Super Sport 2018
Бренд: Boston Whaler Страницы: 92
Welcraft 232 Coastal Owner'S Manual preview
232 Coastal
Бренд: Welcraft Страницы: 98
Skier's Choice Supra 2014 Instruction Manual preview
Supra 2014
Бренд: Skier's Choice Страницы: 92
Per Brohall Albin 25 Handbook preview
Albin 25
Бренд: Per Brohall Страницы: 34

Бренды по названию

Популярные бренды

Загрузить еще бренды