manualshive.com logo in svg

MasterCraft NXT20 2017, Руководство пользователя

Владельцы MasterCraft NXT20 2017 могут бесплатно загрузить руководство пользователя на нашем сайте. Этот мануал поможет вам получить максимум от вашего судна, обеспечивая информацией о его использовании и техобслуживании. Не забудьте скачать его с manualshive.com.

Поделиться
Скачать
background image

2017 OWNERS MANUAL / 

284

The use of canvas covers, especially dark colored ones, in hot, sun-
ny conditions, can result in temperatures inside the boat in excess 
of 140°F/60°C. Prolonged high temperatures can heat interior met-
al and other surfaces to the point that brief contact with the skin 
may cause serious burns. Carefully remove the cover and allow the 
interior to ventilate and cool before allowing anyone on board.

BIMINI CANVAS 

Models

 

All MasterCraft Models have optional bimini tops. Each tower style 
has a bimini designed specifically for that tower (ProStar optional 
windshield mounted bimini). 

Purpose 

 

MasterCraft’s bimini is designed to enhance comfort and protect 
boaters from the sun’s rays while on the water. 

Location 

 

Bimini tops are designed and built to match each of MasterCraft’s 
tower options. The bimini is integrated into its respective tower 
and will usually cover the helm and/or midsection of the boat. 
Bimini legs and canvas fold to allow minimal wind resistance when 
towing, during storage or when riding across a body of water at high 
speeds. When folding the bimini up or down, be careful to avoid 

To deploy the ZFT4 or ZFT7 Bimini: 

For balance, it is suggested that operators have an additional 
person assist when raising or lowering a bimini top.

1. 

Unzip and remove the bimini boot cover. 

2. 

Unclip all clips securing the bimini legs to one another.

3. 

Unfold and deploy the bimini. The bimini folds forward away from 
the tower. 

4. 

Zip all of the zippers on the aft portion of the canvas around the 
forward most tower tube. 

5. 

Buckle all straps around the tower loosely. 

6. 

Fully extend the bimini legs and ensure that they are locked into 
place.  

7. 

Tighten all straps and buckles around the tower so that the 
canvas is stretched tightly around the tower. 

pinching fingers between the support legs. 

Operation

 

See each tower’s respective bimini section immediately following.

When trailering a boat or when operating the boat at high speeds, 
fold the bimini down to reduce wind resistance. High speeds put 
large amounts of air pressure on the bimini legs and can cause 
them to collapse causing serious injury and damage to the boat. 

ZFT4 AND ZFT7 BIMINI 

Models

 

All X Series and XT Series boats equipped with a ZFT4 or ZFT7 
Power Tower. Though the biminis look slightly different, they deploy 
and operate identically.

Purpose 

 

The ZFT4 and ZFT7 biminis cast shade on the cockpit of the boat to 
keep occupants cool and protected from the sun’s rays.

Location 

 

Integrated into the ZFT4 and ZFT7 towers. 

Operation

 

Biminis come pre-installed from dealers on all models. 

Collapsing the bimini is the opposite of deploying it:

1. 

Unlock the bimini legs and let them fold forward loosely.  

2. 

Loosen and unclip all buckles around the tower tubes and 
supports.

3. 

Unzip all zippers around the tower tubes. 

4. 

Fold the bimini and canvas up to the tower.

5. 

Use the gray leg clips to keep the bimini legs locked together. 

6. 

Cover the bimini with the protective boot and zip the boot around 
the canvas.  

Troubleshooting  

Should the bimini ever bind or become locked in either the stowed 
or deployed position, MasterCraft recommends that the bimini be 
taken to an authorized MasterCraft dealer for repair. 

PROSTAR BIMINI

Models

 

ProStar

Purpose 

 

The ProStar bimini casts shade on the cockpit of the boat to keep 
occupants cool and protected from the sun’s rays.

Location 

 

Mounted to the ProStar’s windshield.

Operation

 

Содержание NXT20 2017















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NXT20 2017

PURSUIT 2150 Dual Console Owner'S Manual preview
2150 Dual Console
Бренд: PURSUIT Страницы: 68
J/Boats J-33 Owner'S Manual preview
J-33
Бренд: J/Boats Страницы: 67
Jeanneau CAP CAMARAT 7.5 CC serie 2 Owner'S Manual preview
CAP CAMARAT 7.5 CC serie 2
Бренд: Jeanneau Страницы: 112
O'Brien ALL-STAR 2101112 Owner'S Manual preview
ALL-STAR 2101112
Бренд: O'Brien Страницы: 8
Bush C-300RIB Owner'S Manual preview
C-300RIB
Бренд: Bush Страницы: 15
LaserPerformance Cascais Fun Rigging Manual preview
Cascais Fun
Бренд: LaserPerformance Страницы: 22
SEABOB F5 Operator'S Manual preview
F5
Бренд: SEABOB Страницы: 68
komodo KD2PCINFKYA User Manual preview
KD2PCINFKYA
Бренд: komodo Страницы: 16
3D Tender TWA290 Owner'S Manual preview
TWA290
Бренд: 3D Tender Страницы: 23
Jeanneau Sun Odyssey 40 User Manual preview
Sun Odyssey 40
Бренд: Jeanneau Страницы: 115
Yamaha 210FSH SPORT 2022 Operator'S Manual preview
210FSH SPORT 2022
Бренд: Yamaha Страницы: 146
Yamaha XL700 WaveRunner 2003 Owner'S/Operator'S Manual preview
XL700 WaveRunner 2003
Бренд: Yamaha Страницы: 117
Yamaha GP760 Service Manual preview
GP760
Бренд: Yamaha Страницы: 181
VFTech GNOM BABY Operator'S Manual preview
GNOM BABY
Бренд: VFTech Страницы: 32
Sea Ray 290 Select EX Owner'S Manual preview
290 Select EX
Бренд: Sea Ray Страницы: 68
Sea Ray 220 Select Owner'S Manual preview
220 Select
Бренд: Sea Ray Страницы: 94
grabner Adventure Team Owner'S Manual preview
Adventure Team
Бренд: grabner Страницы: 8
grabner HAPPY CAT HURRICANE Owner'S Manual preview
HAPPY CAT HURRICANE
Бренд: grabner Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды