manualshive.com logo in svg

MasterCraft NXT20 2017, Руководство пользователя

Владельцы MasterCraft NXT20 2017 могут бесплатно загрузить руководство пользователя на нашем сайте. Этот мануал поможет вам получить максимум от вашего судна, обеспечивая информацией о его использовании и техобслуживании. Не забудьте скачать его с manualshive.com.

Поделиться
Скачать
background image

2017 OWNERS MANUAL / 

346

Be sure all fasteners used are approved and rated for marine use. 
Most fasteners used on MasterCraft boats are stainless steel or 
specially coated to resist corrosion.

 

 

 
 

Use of improper parts may cause component or engine failure. 
Such failure may result in death or serious injury!

Exposure to salt water will cause corrosion leading to significant 
damage to stainless steel, chrome and anodized aluminum parts. 
Failure to thoroughly rinse salt water from all hardware, and to ap-
ply protective oil after each exposure to salt water, will accelerate 
the corrosion of hardware and will void your warranty.

Exposure to salt water will cause corrosion leading to significant 
damage to stainless steel, chrome and anodized aluminum parts. 
Failure to thoroughly rinse salt water from all hardware, and to apply 
protective oil after each exposure to salt water, will accelerate the 
corrosion of hardware and will void your warranty.

MARINE GROWTH

If accelerated marine growth is a problem in the area in which the 
boat will generally be operated, an anti-fouling bottom paint may 
be necessary to slow growth while protecting the gel coat.  Before 
selecting a bottom paint, talk with other boaters and an authorized  
MasterCraft dealer’s service department to determine the product 
that works best in the area. Many local variables may also affect 
the selection of paint. Be sure to follow the paint manufacturer’s 
directions exactly.

SALT WATER CORROSION

MasterCraft boats have been designed for operation in fresh 
water unless equipped with the Salt Water Package. If operating a 
fresh-water model temporarily in salt, polluted or brackish water, 
thoroughly flush the boat with fresh water as soon as possible after-
ward. The entire engine cooling system should be flushed with fresh 
water for at least ten (10) minutes after each use in such waters. Do 
not operate boats continuously in saltwater unless equipped with a 
closed cooling system to preserve engine life.  
 

SALTWATER CARE &  

MAINTENANCE 

Saltwater or brackish water can deteriorate the condition of a boat 
much faster than freshwater. To maintain the condition, appearance 
and functionality of boats used in salt water: 

8. 

Flush the engine with fresh water in accordance with the Ilmor 
Engine Owner’s Manual (10 minutes minimum).

9. 

Rinse the boat with fresh water after each use in salt water:

• 

Bilge

• 

Hull and deck including all underwater gear

• 

Upholstery 

• 

Carpet

• 

If a boat has removable floor covering it should be removed 
for drying

10. 

Rinse metal components with fresh water and wipe down with 

WD-40:

• 

Aluminum dash plates

• 

Steering wheel

• 

Tower components

• 

Engine

• 

Hand rails

• 

Cleats

• 

Glovebox 

• 

Walk-thru door

• 

Exposed Seat frames

• 

Windshield frame and stanchions

11. 

Spray motor mounts with a corrosion inhibitor at least once a 
month.

12. 

Inspect anodes and replace when they reduce to 50 percent of 

their original size.

STAINLESS STEEL AND CHROME/

ANODIZED ALUMINUM 

Stainless steel, chrome-plated and anodized aluminum parts are 
not totally resistant to corrosion. Occasional cleaning and polishing 
with a marine chrome-and-stainless polish will maintain and extend 
the life of these parts. In salt water areas, it is imperative that you 
thoroughly rinse all hardware with fresh water and apply a light 
coating of protective oil to enhance the appearance after each use.

Содержание NXT20 2017















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NXT20 2017

JET BOARD JB 100 JET BOARD Service Manual preview
JB 100 JET BOARD
Бренд: JET BOARD Страницы: 24
BRABUS SHADOW 500 2021-2022 Owner'S Manual preview
SHADOW 500 2021-2022
Бренд: BRABUS Страницы: 121
Hobie Brave Assembly Manual preview
Brave
Бренд: Hobie Страницы: 16
Newage PRM 140L Workshop Manual preview
PRM 140L
Бренд: Newage Страницы: 39
Grady-White Boats Canyon 456 Manual preview
Canyon 456
Бренд: Grady-White Boats Страницы: 90
Bavaria 36 2003 Information & Operation Manual preview
36 2003
Бренд: Bavaria Страницы: 29
BENETEAU OCEANIS 31 Owner'S Manual preview
OCEANIS 31
Бренд: BENETEAU Страницы: 138
Quicksilver 555 Pilothouse Owner'S Manual preview
555 Pilothouse
Бренд: Quicksilver Страницы: 53
Banzai 2-IN-1 SLIDE & BOUNCE COMBO PARK Assembly Instructions Manual preview
2-IN-1 SLIDE & BOUNCE COMBO PARK
Бренд: Banzai Страницы: 8
Yamaha WaveRunner SUPERJET 700 2002 Owner'S/Operator'S Manual preview
WaveRunner SUPERJET 700 2002
Бренд: Yamaha Страницы: 112
Lake Powell 48 NAVIGATOR Instruction Manual preview
48 NAVIGATOR
Бренд: Lake Powell Страницы: 28
Mercury 140 Service Manual preview
140
Бренд: Mercury Страницы: 64
Wayland Folding Kayaks MK II FORMOZA 550 SOF COMBAT Assembly Instructions Manual preview
MK II FORMOZA 550 SOF COMBAT
Бренд: Wayland Folding Kayaks Страницы: 9
Edgewater Networks 190 InShore 2014 Series Owner Assistance Manual preview
190 InShore 2014 Series
Бренд: Edgewater Networks Страницы: 214
NRS Outlaw Series Owner'S Manual preview
Outlaw Series
Бренд: NRS Страницы: 8
Corsair Marine Pulse 600 Sailing Manual preview
Pulse 600
Бренд: Corsair Marine Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды