manualshive.com logo in svg

MasterCraft NXT20 2017, Руководство пользователя

Владельцы MasterCraft NXT20 2017 могут бесплатно загрузить руководство пользователя на нашем сайте. Этот мануал поможет вам получить максимум от вашего судна, обеспечивая информацией о его использовании и техобслуживании. Не забудьте скачать его с manualshive.com.

Поделиться
Скачать
background image

2017 OWNERS MANUAL / 

364

DO NOT IGNORE OR OVERLOOK THIS INSPECTION! REPAIR AS 
NECESSARY!

BEFORE EACH USE

After Starting the Engine

Check That The Battery Is Fully Charged

As the boat is started, check all gauges (analog dash mounted for X 
and XT Series, digital display for XStar and NXT Series), but pay par-
ticular attention to the voltage. (On all models, press the Gauge soft 
key on the left side of the touch screen to access this information.)

 

While starting the engine, check that the voltmeter reads between 
12.4 and 14.5 volts. An erratic reading may be a sign of low voltage. 
The voltage reading is the best indication of the status of your bat-
tery, however it is not fool-proof. While the reading may indicate that 
the battery is producing current, if during a previous operation you 
had reason to suspect a problem with your battery, check with an 
authorized MasterCraft dealer’s service department.

Gasoline is highly flammable and its vapors may ignite, resulting in

fire or explosion. Be sure to keep all sparks and flames away from

the area while inspecting the boat’s fuel system. 

Step 2

Open the engine compartment and visually check as much of the 
fuel system from the tank to the engine as you can see. On some 
models this is will be a limited area. If the odor of gasoline is strong 
or if you see visual evidence of fuel outside the system, cease all 
operations and take the boat immediately to an authorized Mas-
terCraft dealer’s service department to determine the source of 
the leak. The leak must be repaired before the engine is restarted. 
Because the lines on late model MasterCraft boats are pressurized, 
they can be disconnected and/or removed ONLY by using special-
ized tools.

The engine box serves as a machinery guard. The engine must  
be OFF whenever the box is open. Clothing for body parts can get 
caught in moving parts, causing death or serious injury. Keep away 
from moving parts!

Fuel leakage can lead to a build-up of potentially explosive fumes 
within the engine compartment.  DO NOT IGNORE OR OVERLOOK 
THIS INSPECTION AND REPAIR AS NECESSARY!

NOTE ANY EXHAUST ODORS

This function should be performed prior to starting the engine; and 
then again after about three (3)-to-five (5) minutes to determine 
whether any leaks are apparent.

Step 1

First ensure that the engine is OFF and that the engine safety start-
ing switch is disconnected. Be certain that the throttle/shift control 
lever is in neutral. The engine must be cool.

Step 2

Open the engine compartment and note whether there is any un-
usual odor. In many instances, exhaust will have little or no odor, but 
in the event of a potentially significant exhaust leakage, it may be 
possible to smell a “rotten-egg” odor that signifies a probable issue 
that must be addressed.

Step 3

If leakage is apparent, tighten the hose clamps, being careful to 
avoid crimping the hose. If the leakage is significant, or is occurring 
at a location other than the joints (such as a split in a hose), see 
your authorized MasterCraft  dealer’s  service department for parts 
and service.

Exhaust fumes can cause illness or impairment, including carbon 
monoxide poisoning. Equally important to consider, leakage can 
lead to a build-up of potentially explosive fumes within the engine 
compartment. 

any kinks and wear on the outer jacket. Any sign of cable damage is 
cause for replacement. See your authorized MasterCraft dealer’s 
service department if you notice any cable damage. 

INSPECT THE FUEL SYSTEM 

FOR LEAKS

This function should be performed prior to starting the engine; and 
then again after about three (3)-to-five (5) minutes to determine 
whether any leaks are apparent.

Step 1

Ensure the engine is OFF, the engine safety starting switch is dis-
connected and the throttle/shift control lever is in neutral.

Содержание NXT20 2017















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NXT20 2017

KL Industries Mackinaw 156 Canoe Owner'S Manual preview
Mackinaw 156 Canoe
Бренд: KL Industries Страницы: 5
XO boats CRUISER Owner'S Manual preview
CRUISER
Бренд: XO boats Страницы: 58
Sea-doo Utopia Operator'S Manual preview
Utopia
Бренд: Sea-doo Страницы: 116
Sea-doo SAR 2018 Series Operator'S Manual preview
SAR 2018 Series
Бренд: Sea-doo Страницы: 164
Hadron H2 Owner'S Manual preview
H2
Бренд: Hadron Страницы: 11
Pelican IPVUEKJP12-2 Assembly Instructions preview
IPVUEKJP12-2
Бренд: Pelican Страницы: 3
Sea Ray 410 Sundancer Owner'S Manual Supplement preview
410 Sundancer
Бренд: Sea Ray Страницы: 78
NW Explorations AnamCara Operating Manual preview
AnamCara
Бренд: NW Explorations Страницы: 58
Yamaha WaveRunner Service Manual preview
WaveRunner
Бренд: Yamaha Страницы: 515
Walker Bay 310R Assembly Instruction Manual preview
310R
Бренд: Walker Bay Страницы: 8
WASZP WASZP Checklist preview
WASZP
Бренд: WASZP Страницы: 17
Banzai WAVE CRUISER Instructions Manual preview
WAVE CRUISER
Бренд: Banzai Страницы: 10
Yamaha FX SHO WaveRunner 2013 Owner'S/Operator'S Manual preview
FX SHO WaveRunner 2013
Бренд: Yamaha Страницы: 116
Meridian Yachts 381 Sedan Owner'S Manual preview
381 Sedan
Бренд: Meridian Yachts Страницы: 92
Sea Ray 480 Sedan Bridge Owner'S Manual Supplement preview
480 Sedan Bridge
Бренд: Sea Ray Страницы: 101
Sea Ray 52 Sundancer Owner'S Manual preview
52 Sundancer
Бренд: Sea Ray Страницы: 210
Sea Ray 390 Sundancer Owner'S Manual preview
390 Sundancer
Бренд: Sea Ray Страницы: 184
BENETEAU 40 Owner'S Manual preview
40
Бренд: BENETEAU Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды