MasterCraft NXT20 2017 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 238

background image

2017 OWNERS MANUAL /

14

FIRE EXTINGUISHERS

The engine compartment in every MasterCraft boat is equipped
with an automatic fire suppression system. The system has a
manual deployment handle mounted in the helm area (domestic
boats only) which uses a clean agent canister to suppress fires in
the engine compartment.

Every boat MasterCraft builds is required by law to have on board
one (1) 2.5-pound, dry chemical fire extinguisher rated for Type A, B
and C fires. The dry chemical fire extinguisher is standard equip-
ment, and is automatically included in your boat from the factory.
Replacement units can be ordered from MasterCraft.

If any of the fire suppression system canisters on board your boat
are discharged (whether a canister in an automatic system or a
portable fire extinguisher), then they must be replaced immediate-
ly. If the automatic fire suppression system has been discharged,
the video display at the helm will notify the driver. If the clean agent
canister associated with the automatic fire suppression system has
been discharged, it must be replaced. Contact your authorized Mas-
terCraft dealer to obtain a replacement for the clean agent type of
canister. If the dry chemical fire extinguisher has been discharged,
it must be replaced with a fire extinguisher that is rated for Type
A, B and C fires from an authorized MasterCraft dealer or another
source.

IN THE EVENT OF A FIRE

Fire on-board is among the most serious of matters that boaters
can experience. Due to the close proximity of fuel tanks and a num-
ber of electrically operated items that can result in a spark or arc,
any and all fires on a boat should be a matter for immediate action.

While your MasterCraft boat is equipped with a fire suppression
system and fire extinguishers (except models imported into Japan),
it is important to make a quick and calculated decision regarding
any fires. If the extinguishing/suppression materials do not quickly
extinguish the fire, it may become necessary to abandon ship. Make
sure everyone on board has a PFD and swims as quickly and as
far as possible, up wind and upstream, from the boat. If gasoline is
released, it will float on top of the water. It may spread out or move
with the body of water’s current.

EVENTS

REQUIRING SAFETY

KNOWLEDGE

«
...
8
9
10
11
12
...
»

Содержание NXT20 2017















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NXT20 2017

Bavaria 31 'Sunny Side Up' 2008

Бренд: Horizon Yacht Charters Страницы: 27

KAYAK-BW-01-PK-iKAYAK-RED

Бренд: Bluewave Страницы: 6

Бренд: True Course Yachting Страницы: 28

Performance 405

Бренд: Baja Страницы: 88

Бренд: Polaris Страницы: 241

Sun Odyssey 43 DS

Бренд: Jeanneau Страницы: 58

Бренд: PATHFINDER Страницы: 20

Grand Soleil 50

Бренд: Cantiere Del Pardo Страницы: 124

SUPERJET 700 2003

Бренд: Yamaha Страницы: 109

Бренд: Yamaha Страницы: 2

Бренд: Kangui SURF Страницы: 20

Бренд: BENETEAU Страницы: 70

Бренд: Williams Страницы: 15

Бренд: SEAS Страницы: 29

Бренд: Hobby Cat Страницы: 22

Бренд: Hudora Страницы: 12

Бренд: Flipper Страницы: 168

BAVARIA 44 - 3 cabins

Бренд: Bavaria Yachts Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды