manualshive.com logo in svg

MasterCraft NXT20 2017, Руководство пользователя

Владельцы MasterCraft NXT20 2017 могут бесплатно загрузить руководство пользователя на нашем сайте. Этот мануал поможет вам получить максимум от вашего судна, обеспечивая информацией о его использовании и техобслуживании. Не забудьте скачать его с manualshive.com.

Поделиться
Скачать
background image

2017 OWNERS MANUAL / 

18

RUNNING AGROUND OR  

STRIKING UNDERWATER 

OBJECTS 

 

Ascertain whether there is damage to the hull. If water can be 
stopped from entering the boat, cautiously return to dock. Have 
the boat checked out by your authorized MasterCraft dealer to be 
certain that the hull has not been weakened. Even if water does not 
intrude initially, difficulties may occur later. 

 
If water is entering the boat after running aground or striking an 
underwater object, call or signal for assistance. Abandon ship, if 
necessary. Do not attempt to out-run a significant leak to shore as it 
can be difficult to estimate how long it will take for enough water to 
intrude and sink the boat.

Maintain a distance of at least six (6) feet from the ski platform 
when wake surfing or tubing. Any closer risks exposure to CO 
fumes, which can be deadly. Never launch a surfboard from the 
ski platform (or any part of the boat) or end a surfing session by 
surfing onto the ski platform. Such activities can damage the boat, 
which is not covered under warranty. Being on the ski platform at 
any time the boat is running can potentially expose individuals to 
CO poisoning as well. 

•  Never ride on the ski platform or hold on to the ski platform while 

in the water during engine operation, including at idle. Carbon 

monoxide fumes are expelled from the lower transom areas of 

your boat and can cause death or serious illness. See the Com-

mon Sense Approach section following for more details. 

•  Never climb, sit or stand on a tower. The tower is intended for  

towing only as noted.

•  Make sure that everyone knows and uses approved skiing/wake-

boarding hand signals and adheres to common skiing, wake-

boarding and boating courtesy. Inexperienced skiers might not 

know that there are waterskiing hand signals, similar to bicycle 

and motorcycle hand signals, that can be used while skiing. 

For example, giving a thumbs up or palm facing up signal while 

motioning upwards means “speed up,” and the opposite, thumbs 

down or palms facing down, means “slow down.” There are also 

signals for speed—turn right, turn left, stop—and signals for

•  Never follow another boat pulling a rider or tuber. The person may 

fall and could make it necessary to take immediate evasive mea-
sures. This is an unsafe from of operation that should be avoided.

•  When adding accessories to the tower, ensure that the total ag-

gregate weight of the accessories does not exceed 85 lbs. (U.S.). 
Exceeding the limit may result in structural failure of the tower. 
MasterCraft strongly encourages the use of MasterCraft towers 
and accessories only as they have been tested and determined 
to meet product requirements, including weight. 

 
 

Towers should never have a total aggregate weight of accessories 
exceeding 85 lbs. (U.S.). Excessive weight can cause tower failure 
and the collapse of a tower or the disconnection of the tower from 
the deck, which could result in serious bodily injury or damage to 
the boat that is not covered by warranty.

•  Never jump from a boat that is moving at any speed, nor enter 

or exit the water when the engine is running (ON).  (See the 

Common Sense Approach section of this Owner’s Manual for 

additional information regarding carbon monoxide peril.)

IN-WATER ACTIVITIES SAFETY 

 

Individuals in the water are obligated to be as aware of the funda-
mental safety rules as operators. If you are new to water sports, 
you should seek certified training before starting. You may find it 
especially helpful to join a local water-sports club, if available, and 
the U.S.W.S.A. (United States Water Skiing Association).

Remember that the majority of in-water injuries are the result of 
impacts with other objects, so always look where you are going, and 
be aware of what is going on around you. 

PROPELLER(S) MAY CAUSE SERIOUS INJURY OR DEATH.  
Shut off the engine(s) when near persons in the water, prior  
to using sunpads, the swim platform or the boarding ladder.

• Never put your arm, head or any other part of your body through 

the handle/bridle of the ski or wakeboarding line. Never wrap the 

line around any part of the body at any time. 

• Never ski, wakeboard, wake surf or engage in tubing at night.

• Never ski, wakeboard, wake surf or engage in tubing directly in 

front of other boats. 

Содержание NXT20 2017















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NXT20 2017

PROAQUA 34-8922 Instruction Manual preview
34-8922
Бренд: PROAQUA Страницы: 24
C&C Pendragon 27 Quick Start Manual preview
Pendragon 27
Бренд: C&C Страницы: 32
BRABUS SHADOW 500 2021-2022 Owner'S Manual preview
SHADOW 500 2021-2022
Бренд: BRABUS Страницы: 121
Hobie iCat Owner'S Manual preview
iCat
Бренд: Hobie Страницы: 52
J/Boats 70 Owner'S Manual preview
70
Бренд: J/Boats Страницы: 47
Tanzer 22 Owner'S Manual preview
22
Бренд: Tanzer Страницы: 49
Marine Revolution smartwave 4200 series Owner'S Manual preview
smartwave 4200 series
Бренд: Marine Revolution Страницы: 15
BENETEAU Sense 50 Operation Manual preview
Sense 50
Бренд: BENETEAU Страницы: 24
Xo 240 RS Cabin User Manual preview
240 RS Cabin
Бренд: Xo Страницы: 53
Jeanneau SUN ODYSSEY 42 DS Owner'S Manual preview
SUN ODYSSEY 42 DS
Бренд: Jeanneau Страницы: 136
PATHFINDER 2600 TRS Owner'S Manual preview
2600 TRS
Бренд: PATHFINDER Страницы: 32
Zodiac eOPEN 3.4 Owner'S Manual preview
eOPEN 3.4
Бренд: Zodiac Страницы: 35
NW Explorations Eldean Operating Manual preview
Eldean
Бренд: NW Explorations Страницы: 61
NW Explorations Morveren Operating Manual preview
Morveren
Бренд: NW Explorations Страницы: 72
Sea Ray 460 Sundancer Owner'S Manual Supplement preview
460 Sundancer
Бренд: Sea Ray Страницы: 50
Sea Ray 300 Sundancer Owner'S Manual preview
300 Sundancer
Бренд: Sea Ray Страницы: 154
Silverton 38SB Owner'S Manual preview
38SB
Бренд: Silverton Страницы: 216
Minicat 2012 310.SPORT User Manual preview
2012 310.SPORT
Бренд: Minicat Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды