manualshive.com logo in svg

MasterCraft NXT20 2017, Руководство пользователя

Владельцы MasterCraft NXT20 2017 могут бесплатно загрузить руководство пользователя на нашем сайте. Этот мануал поможет вам получить максимум от вашего судна, обеспечивая информацией о его использовании и техобслуживании. Не забудьте скачать его с manualshive.com.

Поделиться
Скачать
background image

2017 OWNERS MANUAL / 

422

handling and safety. MasterCraft dealers offer replacement tires; if 
the owner chooses to purchase tires elsewhere, be certain that the 
replacement tires meet the manufacturer’s requirements and that 
they properly integrate with any tires remaining on the trailer.

Reading Tire Wear

The way your tires wear is a good indicator of how your trailer’s 
various systems are integrating. Abnormal wear patterns are often 
caused by the need for simple tire maintenance or alignment. Tires 
should be inspected at every opportunity. Learning to read the early 
warning signs of trouble can prevent wear that shortens tire life or 
indicates the need for having other parts of the trailer serviced.

Tire Inspection Elements
•  Visually inspect the tires
•  Feel the tread by hand to detect tire wear such as feathering
•  Check all tires with a tire pressure gauge

Samples Of Abnormal Wear

Tires

The most common cause of trailer tire trouble is under-inflation. 
It is important, to always maintain correct air pressure as indicat-
ed by the tire manufacturer on the tire’s sidewalls. (Tire pressure 
information may be listed on stickers elsewhere as a convenience, 
but because tires may be replaced, the air pressure should always 
be verified on the tire’s sidewall. If there is a difference between 
air pressure listings on labels, warning stickers and tire sidewalls, 
always defer to the tire sidewall air pressure listing.) 

Always check the air pressure when the tires are cold. Tires heat up 
and the air pressure increases after traveling short distances. For 
safety and convenience, inflate tires to the air pressure indicated 
on the sidewall of the tire, but always carry a spare wheel and tire in 
case of unexpected or sudden issues with a tire.

When trailer tires become worn or damaged, replace them with new 
tires. An authorized MasterCraft dealer can help you.

During times of storage, maintain the proper tire inflation, shield 
tires from UV rays (direct sunlight), and relieve the load on the tires 
by supporting the trailer frame with concrete blocks or jack stands.

Keep tires properly inflated. Inspect each tire’s pressure before 
each use. Refer to the tire sidewall for proper inflation. Failure to 
maintain the correct tire pressure may result in tire failure and 
loss of control. This may result in serious injury or death and/or 
property damage.

The tires that come equipped on the MasterCraft trailer were 
selected for durability as well as comfort and are matched to the 
trailer’s specifications. Over time, as with all tires, there will be wear 
and eventually replacement will be necessary. At that time, do not 
mix radial and bias tires because it may affect the trailer/tow vehicle

Overinflation

Excessive wear at the center of the tread 
indicates that the air pressure in the tire is 
consistently too high. The tire is riding on the 
center of the tread and wearing it prema-
turely. Many times, the “eyeball” method of 
inflation (pumping the tires up until there 
is no bulge at the  bottom) is at fault. Tire 
inflation pressure should always be checked 

with a reliable tire gauge. Occasionally, this 
wear pattern can result from extremely wide 
tires on narrow rims. In such situations, tires 
or wheels will have to be replaced.

Underinflation

This is the most common problem in trailer 
tires. This type of wear usually results from 
consistent underinflation. When a tire is 
under inflated, there is too much contact 
with the road by the outer treads, which  
wear  prematurely. Tire  pressure should be 
checked with a reliable pressure gauge.

Feathering

Feathering is a condition when the edge of 
each tread rib develops a slightly rounded 
edge on one side and a sharp edge on the 
other. By running your hand over the tire, you 
can usually feel the sharper edges before 
you’ll be able to see them. The most common 
cause of feathering is incorrect toe-in setting. 
If this is occurring, have the toe-in adjusted to 
a proper setting. 

Содержание NXT20 2017















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NXT20 2017

BRIG Eagle 5 Owner'S Manual preview
Eagle 5
Бренд: BRIG Страницы: 44
Prestige 500 User Manual preview
500
Бренд: Prestige Страницы: 124
Quantum Sails STAR Tuning Manual preview
STAR
Бренд: Quantum Sails Страницы: 11
Grady-White Boats Seafarer 228 Owner'S Manual preview
Seafarer 228
Бренд: Grady-White Boats Страницы: 66
Grady-White Boats Gulfstream 232 Owner'S Manual preview
Gulfstream 232
Бренд: Grady-White Boats Страницы: 76
Grady-White Boats SAILFISH 282 Owner'S Manual preview
SAILFISH 282
Бренд: Grady-White Boats Страницы: 78
Grady-White Boats FISHERMAN 230 Owner'S Manual preview
FISHERMAN 230
Бренд: Grady-White Boats Страницы: 74
Grady-White Boats Fisherman 209 Owner'S Manual preview
Fisherman 209
Бренд: Grady-White Boats Страницы: 76
Grady-White Boats Freedom 275 Owner'S Manual preview
Freedom 275
Бренд: Grady-White Boats Страницы: 87
BAY SPORTS AIR GLIDE User Manual preview
AIR GLIDE
Бренд: BAY SPORTS Страницы: 9
Hunter 34 Owner'S Manual preview
34
Бренд: Hunter Страницы: 28
Hunter 20 Owner'S Manual preview
20
Бренд: Hunter Страницы: 40
BENETEAU Oceanis 321 User Manual preview
Oceanis 321
Бренд: BENETEAU Страницы: 127
Vanguard 15 Rigging Manual preview
15
Бренд: Vanguard Страницы: 6
LaserPerformance SUNFISH RACE Rigging Manual preview
SUNFISH RACE
Бренд: LaserPerformance Страницы: 9
Yamaha AR240 HO Owner'S Manual preview
AR240 HO
Бренд: Yamaha Страницы: 134
Velocity 1995 Hunter 430 Operation Manual preview
1995 Hunter 430
Бренд: Velocity Страницы: 18
Kangui SURF Maui Installation Instructions & User Manual preview
Maui
Бренд: Kangui SURF Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды