manualshive.com logo in svg

MasterCraft NXT20 2017, Руководство пользователя

Владельцы MasterCraft NXT20 2017 могут бесплатно загрузить руководство пользователя на нашем сайте. Этот мануал поможет вам получить максимум от вашего судна, обеспечивая информацией о его использовании и техобслуживании. Не забудьте скачать его с manualshive.com.

Поделиться
Скачать
background image

2017 OWNERS MANUAL / 

38

•  Keep your PFD on.
•  Keep your knees bent.
•  Float on your back and paddle slowly to safety.

COLD WATER SURVIVAL 

 

Sudden immersion in cold water can induce rapid, uncontrolled 
breathing, cardiac arrest and other physical body conditions, which 
can lead to drowning. Always wearing a PFD will help survival in rapid 
immersion situations. 

In other situations when entry into cold water is necessary:

•  Wear a PFD.
•  Button all clothing.
•  Cover your head if possible and enter the water slowly.
•  Keep your head out of the water if at all possible. 
•  Assume the Heat Escape Lessening Posture (HELP) position 

as taught within a Coast Guard-taught safety course. Information 

about HELP is available online. 

 
Immersion in water speeds the loss of body heat and can lead to 
hypothermia, the abnormal lowering of internal body temperature. 
If a boat capsizes, it will likely float on or just below the surface. 

ANCHORING 

 

Anchoring is done for two principal reasons: first, to stop for fishing, 
swimming, lunch or an overnight stay, and secondly, to keep a boat 
from running aground in bad weather or as a result of engine failure. 

When preparing to anchor, bring the bow of the vessel into the wind 
or current. Place the engine in neutral. When the boat comes to a 
stop, slowly lower the anchor. Do not throw the anchor over as it will 
tend to foul the anchor or tangle line. When the anchor line has been 
let out, back up away from the anchor with the engine in idle reverse 
to help set the anchor. After it is firmly set, use reference points 
(landmarks) in relation to the boat to be sure that the boat is not 
drifting. Check the points frequently.

To reduce the effects of hypothermia, get in or on the boat. Try to 
get as much of your body out of the water as possible. If you can’t 
get in the boat, a PFD will enable you to keep your head out of the 
water. This is very important because about 50 percent of body 
heat loss is from the head. 

 
It may be possible to revive a drowning victim who has been under 
water for some time and shows no sign of life. Cases document 
instances where victims have been resuscitated after extended 
periods. Start CPR immediately and get the victim to a hospital as 
quickly as possible. 

 
Immersion suits will delay the effects of hypothermia in cold water 
and are available through many retailers who specialize in sales 
of marine products. The suits should be stored and maintained 
according to the manufacturer’s instructions.

INFLATABLE LIFE RAFTS 

 

An inflatable life raft can provide a survival platform for an extended 
period of time. Be sure the life raft is large enough for everyone on 
board when the boat operates off-shore. It should have the appro-
priate emergency equipment pack and should be professionally 
serviced periodically, according to the manufacturer’s instructions. 
Coast Guard-approved life rafts must meet a number of stringent 
material and performance standards.

Содержание NXT20 2017















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NXT20 2017

Anacortes Yacht Charters AEROKNOT Operation Manual preview
AEROKNOT
Бренд: Anacortes Yacht Charters Страницы: 15
Hunter 50CC Operation Manual preview
50CC
Бренд: Hunter Страницы: 200
Hunter MH37 Operator'S Manual preview
MH37
Бренд: Hunter Страницы: 271
Sea-doo GTS 5815 Shop Manual preview
GTS 5815
Бренд: Sea-doo Страницы: 618
Mercury 140 Operation And Maintenance Manual preview
140
Бренд: Mercury Страницы: 88
Nacra F18 Evolution Assembly Manual preview
F18 Evolution
Бренд: Nacra Страницы: 56
Ocean Kayak Trident 11 Owner'S Manual preview
Trident 11
Бренд: Ocean Kayak Страницы: 7
GALA VIKING V Series User Manual preview
VIKING V Series
Бренд: GALA Страницы: 24
Jensen Marine Cal 2-46 Owner'S Manual preview
Cal 2-46
Бренд: Jensen Marine Страницы: 22
Yamaha XLT1200 WaveRunner 2002 Owner'S/Operator'S Manual preview
XLT1200 WaveRunner 2002
Бренд: Yamaha Страницы: 142
Friday Harbor Commander 9 FH301 Owner'S Manual preview
Commander 9 FH301
Бренд: Friday Harbor Страницы: 8
Pro-Line Boats 33 Express Owner'S Manual preview
33 Express
Бренд: Pro-Line Boats Страницы: 69
Genesis 1N00-510 User Manual preview
1N00-510
Бренд: Genesis Страницы: 26
FLASSMER RR 4.2 Operator'S Handbook Manual preview
RR 4.2
Бренд: FLASSMER Страницы: 49
Centurion Fi21 Owner'S Manual preview
Fi21
Бренд: Centurion Страницы: 194
Beacon 1356914 Instructions And Owner'S Manual preview
1356914
Бренд: Beacon Страницы: 52
PURSUIT 1989 2350 Outboard Bracket Owner'S Manual preview
1989 2350 Outboard Bracket
Бренд: PURSUIT Страницы: 34

Бренды по названию

Популярные бренды

Загрузить еще бренды