MasterCraft 54-4790-6, Руководство пользователя

Страница: 28 / 39

28
SANDING TIPS
– cont’d
NOTE: Setting the rotary tool at a faster
speed will produce smoother sanding
action.
5. Keep the rotary tool moving while the
sandpaper is in contact with the workpiece
in order to avoid removing excess material
from the workpiece.
INSTALLING THE MINI CIRCULAR SAW
ATTACHMENT
1. Remove the collet nut (1) and the collet
from the motor shaft (2) (Fig. 15).
NOTE:
Engage the spindle lock button in
order to hold the spindle in place while
loosening and tightening the collet nut.
2. Remove the spindle nut (3) from the tool
by turning it counter-clockwise.
3. Insert the short end of the drive shaft (4)
into the motor shaft until the stopper (5)
comes into contact with the shaft.
4. Slide the collet nut over the drive shaft
(9), and thread it onto the motor shaft by
turning the collet nut clockwise. Tighten
the collet nut using the collet wrench.
5. Remove the saw attachment adaptor (6)
and the collar (7) from the circular saw
attachment by turning the collar counter-
clockwise.
ASSEMBLY AND OPERATING INSTRUCTIONS
Fig. 15