MasterCraft 54-4790-6, Руководство пользователя

Страница: 36 / 39

36
WARNING:
When servicing, use
only identical replacement parts. The use
of any other part may create a hazard or
damage the rotary tool.
Do not abuse power tools. Abusive
practices can damage the tool and the
workpiece.
WARNING:
Do not attempt to
modify this rotary tool or to create
accessories. Any such alteration or
modification is considered to be misuse,
and could result in a hazardous condition
that may lead to serious injury. Doing so
will also void the warranty.
CLEANING
Do not
use solvents to clean plastic parts.
Many plastics are susceptible to damage
from various types of commercial solvents.
Use a clean cloth to remove dirt, dust, oil,
grease, etc.
WARNING:
Do not allow brake
fluids, gasoline, petroleum-based products,
penetrating oils, etc. to come into contact
with plastic parts. These substances
contain chemicals that can damage,
weaken, or destroy plastic.
Power tools are subjected to accelerated
wear and possible premature failure when
they are used on fiberglass boats and
sports cars, wallboard, spackling
compounds, or plaster. The chips and
grindings from these materials are
extremely abrasive to some parts of power
tools, including bearings, brushes,
commutators, etc. Therefore, it is
recommended that this tool not be used for
extended work on any fiberglass material,
wallboard, spackling compound, or plaster.
If this rotary tool is used on these
materials for an extended period, it must
be cleaned frequently by blowing it out with
an air jet.
WARNING:
Wear safety goggles or
safety glasses that have side shields
whenever performing any operation
with a
rotary tool. It is also critical to wear
safety goggles or safety glasses that have
side shields, as well as a dust mask, when
blowing dust out of the tool using an air jet.
Failure to observe these safety
precautions could result in permanent eye
or lung damage.
LUBRICATION
All of the bearings in this rotary tool have
been lubricated with a sufficient quantity of
high-grade lubricant for the life of the tool
under normal conditions. No further
lubrication is required.
!
!
MAINTENANCE
!
!
!