MasterCraft 54-4790-6, Руководство пользователя

Страница: 33 / 39

33
SELECTING THE PROPER SPEED
The different types of operations that can
be performed require that the rotary tool be
used at different speeds. The following
chart outlines some of the basic speed
settings:
OPERATION
SPEED
(RPM)
Sanding 13,000
Cutting metal 35,000
Sanding wood 13,000
Cutting hard metal 29,000
Engraving metal 27,000
Sawing 25,000
De-burring 19,000
Drilling holes 17,000
Removing rust 13,000
Sharpening 9,000
Polishing 9,000
WARNING:
For safety reasons, the operator must read the sections of this
Owner's Manual entitled “GENERAL SAFETY WARNINGS”, “POWER TOOL
SAFETY”, “SPECIFIC SAFETY RULES”, EXTENSION CORD SAFETY” and
“SYMBOLS” before using this rotary tool.
Verify the following every time the rotary tool is used:
1. All accessories that are being used are in good condition and are not
damaged in any way.
2. The workpiece is properly secured and the accessory is securely installed.
3. The operator is wearing safety glasses.
Failure to observe these safety rules will significantly increase the risk of injury.
Failure to adhere to these safety rules can greatly increase the chances of
injury.
!
ASSEMBLY AND OPERATING INSTRUCTIONS