MasterCraft 54-4790-6, Руководство пользователя

Страница: 27 / 39

27
INSTALLING THE PAD ONTO THE SANDER
–
cont’d
2. Insert the top of the pad and the
sandpaper into the open clamp.
NOTE:
Verify that the top of the pad is
centered in the clamp, and that the clamp
grips the sandpaper.
3. Rotate the pad clamp lever clockwise in
order to secure the pad and sandpaper in
position.
SANDING WOOD
WARNING:
Wear safety goggles,
hearing protection, and a dust mask
when performing sanding operations.
Failure to use adequate protection may
result in serious injury.
Use the sander in the same manner as
any other finishing sander.
SANDING TIPS
1. Use coarse sandpaper to remove
material from gouges and rough areas
more quickly. Coarse paper lasts longer,
and is less likely to get clogged up with
wood resin and surface finishes.
2. Use fine sandpaper for a smoother
finish.
3. In order to improve sanding action,
verify that the sandpaper is firmly pressed
onto the “hook” area of the sanding pad.
4. Turn rotary tool on before the sandpaper
comes into contact with the workpiece.
!
ASSEMBLY AND OPERATING INSTRUCTIONS
Fig. 14