MasterCraft 54-4790-6, Руководство пользователя

Страница: 19 / 39

19
INSTALLING ACCESSORIES
– cont’d
2. Depress the spindle lock button (1), and
slowly turn the collet nut (2) until the
spindle lock button locks the spindle in
place (Fig. 2).
3. Hold the spindle lock button down, and
turn the collet nut counter-clockwise until
the collet is loose inside the collet nut.
4. Insert the shank of the accessory (3)
into collet.
NOTE:
Verify that the proper collet is used
for the accessory. If the collet is too large,
replace it with the next smaller size.
5. Press the spindle lock button, and
engage it in the spindle. While holding the
spindle lock button down, turn the collet
clockwise by hand in order to tighten it .
NOTE: Do not use pliers to tighten the
collet nut. Use the collet wrench that is
provided. Over-tightening the collet will
damage the tool.
6. Pull on the accessory in order to verify
that it is held securely in position.
CONNECTING THE FLEXIBLE SHAFT
TO THE TOOL
WARNING:
Do not bend the
flexible shaft to a radius of less than 6”
(15.2 cm) when using it with the rotary
tool. Store the flexible shaft carefully
when it is not in use, avoiding sharp
bends.
!
ASSEMBLY AND OPERATING INSTRUCTIONS
Fig. 2