Masimo Rad-97 Скачать руководство пользователя страница 3

Страница: 3 / 188

www.masimo.com

Masimo

These operating instructions provide the necessary information for proper operation of all

models of the Rad-97. There may be information provided in this manual that is not relevant

for your system. General knowledge of pulse oximetry and an understanding of the features

and functions of Rad-97 are prerequisites for its proper use. Do not operate Rad-97 without

completely reading and understanding these instructions.

Note

: Cleared Use Only: The device and related accessories are cleared by the Food and Drug

Administration (FDA) and are CE Marked for noninvasive patient monitoring and may not be

used for any processes, procedures, experiments, or any other use for which the device is not

intended or cleared by the applicable regulatory authorities, or in any manner inconsistent

with the directions for use or labeling.

Notice

: Purchase or possession of this device does not carry any express or implied license to

use with replacement parts which would, alone or in combination with this device, fall within

the scope of one of the relating patents.

CAUTION

: Federal (USA) law restricts this device to sale by or on the order of a physician. See

instructions for use for full prescribing information, including indications, contraindications,

warnings and precautions.

For professional use. See instructions for use for full prescribing information, including

indications, contraindications, warnings, and precautions.

Wireless Radio

Contains: FCC ID: VKF-MWM1 | Model: Rad-97 | IC: 7362A- MWM1 | IC Model: MWM1

Masimo Corporation

40 Parker

Irvine, CA 92618, USA

Tel.: 949-297-7000

Fax.: 949-297-7001

www.masimo.com

EU authorized representative for Masimo Corporation:

MDSS GmbH

Schiffgraben 41

D-30175 Hannover, Germany

3149433

MEDICAL ELECTRICAL EQUIPMENT

WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARDS ONLY

IN ACCORDANCE WITH

ANSI/AAMI ES 60601-1:2005,CAN/CSA C22.2 No. 60601-1:2008, and

applicable Particular (EN/ISO 80601-2-61:2011) and related Collateral (IEC

60601-1-8:2006) Standards for which the product has been found to comply by

Intertek.

Patents:

www.masimo.com/patents.htm

®, Adaptive Probe Off Detection®, APOD®, Discrete Saturation Transform®, DST®,

FastSat®, FST®, Masimo®, Pulse CO-Oximeter®, PVi®, rainbow®, rainbow Resposable®,

RRa®, SET®, Signal Extraction Technology®, Signal IQ®, SpCO®, SpHb®, and SpMet® are

federally registered trademarks of Masimo Corporation.
Rad-97™, rainbow Acoustic Monitoring™, rainbow SET™, RAM™, Adaptive Threshold Alarm™, In

Vivo Adjustment™, ORi™, X-Cal™, Kite™, SpOC™, and RRp™ are trademarks of Masimo

Corporation. All other trademarks and registered trademarks are property of their respective

Содержание Rad-97





























































































































































































Результаты поиска

Содержание Rad-97

Отзывы:

Похожие инструкции для Rad-97

Бренды по названию

Популярные бренды

Masimo Rad-97, Руководство оператора

Результаты поиска

Содержание Rad-97

Отзывы:

Похожие инструкции для Rad-97

Бренды по названию

Популярные бренды