Masimo Rad-97, Руководство оператора

Страница: 121 / 188

Rad-97 Chapter 7: Admit to and Discharge from Patient SafetyNet
www.masimo.com 119 Masimo
4. In the assignment section of the Patient menu (see Fig. 3), select the primary
pager, then press Admit .
Fig. 3
Not Monitoring Message
When the sensor is off the patient for an extended period of time, a
Not Monitoring
message
will appear on the screen. Acknowledge the message by pressing Cancel or Discharge . Press
Discharge to discharge the patient that is currently admitted on Rad-97, or press Cancel to
keep the same patient admitted.
Monitoring Resumed Message
When the sensor is taken off and placed back onto a patient, a Monitoring Resumed message
will appear on the Rad-97 screen.
If this is a new patient, press
Discharge to discharge the previous patient. If the same patient
is being monitored, press Confirm to continue monitoring the same patient.