Maserati Ghibli, Руководство пользователя

Страница: 72 / 308

ParkSense
®
Park Assist
(optional)
The ParkSense
®
Park Assist (hereafter
called “Park Assist”) system provides
visual and audible indications of the
distance between the rear and/or front
bumper and a detected obstacle when
backing up or moving forward, e.g.
during a parking maneuver.
Refer to “Park Assist System Usage
Precautions” for limitations of this
system and recommendations.
Park Assist system will retain the last
system state (enabled or disabled)
from the last ignition cycle when the
ignition is changed to the
RUN
position.
Park Assist system can be active only
when the shift lever is in R (Reverse) or
D (Drive).
If Park Assist is enabled at one of these
shift lever positions, the system will
remain active until the vehicle speed is
increased to approximately 11 km/h
(7 mph) or above. The system will
become active again if the vehicle
speed is decreased to speeds less than
approximately 9 km/h (6 mph).
Park Assist Sensors
The four Park Assist sensors, located in
the rear bumper, monitor the area
behind the vehicle that is within the
sensor's field of view. The sensors can
detect obstacles up to approximately
150 cm (60 in) from the rear bumper in
the horizontal direction, depending on
the location, type and orientation of
the obstacle.
The six Park Assist sensors, located in
the front bumper, monitor the area in
front of the vehicle that is within the
sensor's field of view.
The sensors can detect obstacles up to
a distance of approximately 120 cm
(50 in) from the front bumper in the
horizontal direction, depending on the
location, type and orientation of the
obstacle.
Before Starting
2
70