Maserati Ghibli, Руководство пользователя

Страница: 22 / 308

Vehicle Security Alarm
The vehicle security alarm monitors the
vehicle doors and boot lid for
unauthorized entry and the
START/STOP button for unauthorized
operations.
The system includes a dual function
anti-intrusion sensor and vehicle
anti-lift sensor. The anti-intrusion
sensor monitors the vehicle interior for
motion.
The vehicle anti-lift sensor monitors
the vehicle for any lifting or tilting
actions (tow away, tire removal, ferry
transport, etc). A siren with battery
backup which senses interruptions of
power and communications is also
included.
While the vehicle security alarm is
enabled, interior door locks switches,
boot lid and fuel filler door release are
disabled. If something triggers the
alarm, the vehicle security alarm will
provide the following audible and
visible signals: intermittent buzzer,
park lights and/or turn signals and the
vehicle security light on the dashboard
will flash.
This light will fast flash for
approximately 15 seconds, when the
vehicle security alarm is being armed,
and will then flash slowly until the
vehicle is disarmed.
Rearming the System
If something triggers the security
alarm, and no quick action is taken to
disarm it, the vehicle security alarm
will turn off the beeper after 29
seconds, and turn off all of the visual
signals after 31 more seconds; the
vehicle security alarm will then rearm
itself.
Arming the System
Follow these steps to arm the vehicle
security alarm.
• Make sure the vehicle ignition switch
is OFF .
• Perform one of the following
methods to lock the vehicle:
• Press the lock button on the
interior power door lock switch
located on the driver door trim
panel with the driver and/or
passenger door open.
• Press the button on the exterior
Passive Entry door handle having a
valid key fob RKE transmitter in the
same exterior zone (see “Passive
Entry System” in this section for
further information).
Before Starting
2
20