Maserati Ghibli, Руководство пользователя

Страница: 146 / 308

on the main display area for five
seconds and then returns to the
previous screen. Most of the
messages of this type are then
stored (as long as the condition that
activated it remains active) and can
be reviewed from the "Stored
Messages" main menu item. As long
as there is a stored message, an "i"
will be displayed in the
compass/outside temp sector.
Examples of this message type are
"Right Front Turn Signal Light Out"
and "Tire Pressure” low (as shown in
the picture).
• Unstored Messages
This message type is displayed until
the condition that activated the
message is cleared.
Examples of this message type are
"Turn Signal On" (if a turn signal is
left on) and "Lights On" (if the
driver leaves the vehicle).
• Unstored Messages with Ignition
Switch in RUN
This message type is displayed until
the ignition switch is in
RUN
position. An example of this
message type is "Press Brake and
Push Button to Start" (as shown in
the picture).
• Five-Second Unstored Messages
When appropriate conditions occur,
this type of message appears on the
main display area for five seconds
then returns to the previous screen.
Examples of this message type are
"Memory System Unavailable
Vehicle Not in Park" and "Automatic
High Beams Enabled".
• Five-Second-displayed Navigation
Messages
When the navigation menu is
enabled on the MTC, information
pop ups will be displayed for 5
seconds while changing direction or
approaching a turning point.
On highway, the first pop up will be
displayed at 3.2 km (2 miles) from
the turn, on roadway, at 1.6 km
(1 mile).
While approaching the turn, further
pop ups will be displayed starting at
400 m (0.25 miles) from the turning
point and the countdown to 0
meters.
Dashboard Instruments and Controls
4
144