Maserati Ghibli, Руководство пользователя

Страница: 177 / 308

NOTE:
Normal starting of either a cold or a
warm engine is obtained without
pumping or pressing the accelerator
pedal.
If the driver only pushes the
START/STOP button but does not press
the brake pedal, the ignition switch
cycles to the
ACC position (see “Keys”
in section 2) and the instrument
cluster displays the latest screenshot.
At the second press of the
START/STOP button, the ignition
device switches to RUN position (see
“Keys” in section 2) and the
instrument cluster displays the latest
screenshot.
At the third press of the
START/STOP
button the ignition switch returns to
OFF position and the display powers
down.
At the fourth press of the
START/STOP
button the screen will display the
following message: “Press Brake and
Push Button to Start”.
NOTE:
If the ignition switch is left in the ACC
or RUN (engine not running) position
and the transmission is in P (Park), the
system will automatically time out
after 30 minutes of inactivity and the
ignition will switch to the
OFF
position.
After starting the engine, the idle
speed is controlled automatically and
will decrease as the engine warms up.
Notes for the Diesel Engine Starting
(Diesel only)
With cold engine and external
temperature below 0°C ignition may
be delayed a few seconds in order to
allow the spark plugs to pre-heat. In
this case the amber light
and the
related message will illuminate on the
TFT display and will stay on for a few
seconds after the engine has started.
Cold Weather Precautions (Diesel
only)
If the outside temperature is very low,
the diesel fuel thickens due to the
formation of paraffin clots and could
clog the diesel filter. In order to avoid
these problems, different types of
diesel fuel are distributed according to
the season: summer type, winter type
Driving
5
175