Maserati Ghibli, Руководство пользователя

Страница: 47 / 308

Seat Belt Pretensioners
The car is equipped with front seat
belt pretensioners, that reduce slack in
the belts in the event of a severe
frontal impact. This guarantees the
perfect adherence of the seat belts to
the occupants bodies before the
restraining action begins.
This car is also equipped with a second
pretensioner in the kick plate area. Its
activation is signalled by the
shortening of the metal cable and
from its protective sheath curled.
Pretensioners work for all size
occupant restraint systems, including
the child restraint systems.
NOTE:
To obtain the highest degree of
protection from the action of the
pretensioning device, wear the seat
belt tight to the chest and pelvis.
Pretensioners are triggered by the
Occupant Restraint Controller (ORC). A
pretensioner may be used only once.
Pretensioners do not require any
maintenance or lubrication: any
changes to its original conditions will
invalidate its efficiency. If, due to
unusual natural events (floods, sea
storms, etc.), the device has been
affected by water and mud, it must be
replaced.
WARNING!
It is strictly forbidden to remove or
tamper with the pretensioner
components. Any intervention must
be carried out only by qualified and
authorized personnel. Always contact
the Maserati Service Network.
CAUTION!
Operations which lead to impacts,
vibrations or localized heating (over
100°C/212°F for a maximum of 6 hours
max.) in the area around the
pretensioners may damage or deploy
them erroneously. These devices are
not affected by vibrations caused by
uneven road surfaces or low obstacles.
Contact the
Maserati Service Network
for any intervention that may be
required.
Enhanced Seat Belt Use
Reminder System (SBR)
The SBR system has the function to
remind the driver and the passengers
to fasten the seat belts.
The system monitors whether the
driver and passengers seat belts are
buckled or unbuckled and shows the
situation on the TFT display through
warning light icons
that represent
the occupants position inside the
vehicle.
Seat belts state visualized on the TFT
display
The state of each seat belt is visualized
by an icon on the upper side of the
TFT display.
The position of each icon represents
the position of the occupants inside
the vehicle: the driver and front
passenger are on the side and the rear
passengers icons are in the centre.
Before Starting
2
45