Maserati Ghibli, Руководство пользователя

Страница: 202 / 308

(Continued)
driveability. The vehicle must be
serviced before any emissions tests
can be performed.
• If the malfunction indicator light
(MIL) is flashing while the engine is
running, severe catalytic converter
damage and power loss will soon
occur. Immediate service is required
at the
Maserati Service Network .
• After the problem has been solved,
the Maserati Service Network
personnel will perform specific tests
on the test bench for a complete
check of the system and, if necessary,
also road tests, even on long
distances.
Electronic Speed Control
and Speed Limiter
Using the controls located on the left
side of the steering wheel, the driver
can set a maximum speed limit (SL) or
maintain a constant cruise speed (CC)
without operating the accelerator
pedal. If set, these two functions SL
and CC will exclude each other
according to the driver’s maneuvers.
Speed Limiter (SL)
With this function, the driver can set
the maximum speed limit to be
reached by the vehicle.
It is possible to exceed the set
maximum speed by firmly pressing on
the accelerator pedal. After that, if the
SL function is still active, once the
driving speed returns under the set
value, the SL function will continue to
limit the speed.
Cruise Control (CC)
The electronic speed regulator (Cruise
Control) enables the driver to maintain
the desired vehicle speed without
pressing the accelerator pedal,
reducing driving fatigue on highways,
especially long trips, as the set speed is
automatically maintained. A Firm press
on the accelerator pedal or the
braking pedal will temporarily
deactivate the cruise control function.
CAUTION!
The device can only be switched on at
speeds exceeding 30 km/h (19 mph)
and it switches off automatically when
the brake pedal or the accelerator
pedal is pressed.
WARNING!
The Cruise Control function must only
be activated when traffic and the
route permit a constant speed to be
maintained safely for a sufficiently
long distance.
Driving
5
200