Maserati Ghibli, Руководство пользователя

Страница: 200 / 308

(Continued)
abnormally high brake temperatures,
excessive lining wear, and possible
brake damage. In an emergency full
braking capacity may be impaired.
Use of the Engine
Breaking-In (Gasoline only)
Today's most modern production
methods are designed to provide
extremely precise construction and
assembly of components. However,
moving parts do undergo a settling
process, basically in the first hours of
vehicle operation.
Avoid exceeding 5000 rpm for the first
1000 trip km (620 mi).
After starting the vehicle, do not
exceed 4000 rpm until the engine has
warmed up sufficiently (coolant
temperature: 65-70°C /149-158°F).
Do not drive keeping at a constant
high speed rate for a prolonged time.
While cruising, brief full-throttle
acceleration within the limits of local
traffic laws contributes to a good
break-in. Wide-open throttle
acceleration in low gear can be
detrimental and should be avoided.
The engine oil installed in the engine
at the factory is a high-quality energy
conserving type lubricant. Oil changes
should be consistent with anticipated
climate conditions under which vehicle
operations will occur. For the
recommended viscosity and quality
grades, see “Maintenance Procedures”
in section 7.
A new engine may consume some oil
during its first few thousand
kilometers of operation. This should be
considered as a normal part of the
break-in and not interpreted as an
indication of malfunction.
Specific Requirements for Diesel
Engine
During the first 1500 km (900 mi) avoid
heavy loads, e.g. driving at full
throttle. Do not exceed 2/3 of the
maximum permissible engine speed for
each gear. In M (Manual) drive mode,
change gear in good time. Do not shift
down a gear manually in order to
brake.
While Driving
Never travel with the rev. counter
indicator approaching the peak rpm,
not even downhill. When the rev.
counter indicator is approaching the
peak rpm (red coloured zone), take
precautions to avoid exceeding that
limit.
Driving
5
198