Maserati Ghibli, Руководство пользователя

Страница: 252 / 308

• When additional engine coolant
(antifreeze) is needed to maintain
the proper level, it should be added
to the coolant bottle after removing
the cap. Do not overfill.
• Once the desired level is reached,
firmly close cap of the bottle.
• If frequent engine coolant
(antifreeze) additions are required,
or if the level in the coolant recovery
bottle does not drop when the
engine cools, the cooling system
should be pressure tested for leaks
by a
Maserati Service Center .
• Keep the front of the radiator and
the condenser clean.
WARNING!
• Never add engine coolant
(antifreeze) when the engine is
overheated. Do not loosen or
remove the cap of the engine
coolant bottle to cool an overheated
engine. Heat causes pressure to build
up in the cooling system. To prevent
scalding or injury, do not remove the
pressure cap while the system is hot
or under pressure.
• When adding coolant do not use a
pressure cap other than the one
specified for your vehicle. Personal
injury or engine damage may result.
Brake Fluid Level Check
Check the fluid level immediately if
the brake system warning light
and the related message turn on
indicating a low level of brake fluid.
• Remove the brakes fluid reservoir
access cover.
• Clean the top of the master cylinder
area before removing the cap.
• Add fluid to bring the level up to the
“MAX” mark on the side of the
master cylinder reservoir. Use only
manufacturer's recommended brake
fluid (see “Refillings” in section 8).
• Add enough fluid to bring it to the
“MAX” level marked on the brake
fluid reservoir.
• Once the correct level is reached,
firmly close the cap.
Gasoline
Diesel
Maintenance and Care
7
250